Investigating effect of temperature and time of metalised layer sintering by SMPP method on tensile strength and thermal shock resistance
Source abstract
Abstract
Sintered metal powder process is one of the high technology methods in ceramic–metal joining processes. Improvement in joining zone properties is very important in this method. The present study reveals the effect of metalised layer sintering temperature and time, and applied layer thickness on tensile strength and thermal shock resistance of alumina–copper joint. The results reveal that primary sintering for holding time duration of 90 min at a temperature of 1530°C and applied layer thickness of 50 μm with proper different stages of plating and brazing leads to a tensile strength of 120 MPa in the joining zone. The specimens, which were joined in this condition, were thermal shock resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Engineering DepartmentTarbiat Modares University, Tehran, Iran; Young Researchers Club, Islamic Azad University of Shiraz, Iran
Materials Engineering DepartmentTarbiat Modares University, Tehran, Iran
References (9)
Show source-provided references
1. Cho B.-R. · J. Ceram. Process. Res · 2009 · 10 · 121
2. Foroutan I. ‘Joint ceramic—metal based on sintered metal powder process’, 2nd edn, 37; 2007, Shiraz, Shiraz Navid Publisher.
3. Helgesson C. I. ‘Ceramic to metal bonding’, 16-19 and 42-47; 1968, Cambridge, Boston Technical Publisher.
4. Schneider S. J.: in ‘Ceramics and glasses’,Vol. 4, 504-506; 1998, Metals Park, OH, ASM International.
5. Clobes J. K., and Ruminski A. M. ‘Alternator electrical feed through insulator materials for Project Prometheus’, 42; 2006, West Mifflin, PA, Bechtel Bettis Inc.
6. Belic L., and Alenkas K.: Electron. Vac. Technol, 1995, 125–129.10.1016/B978-1-84569-595-8.50024-6 ↗
7. Takahashi M., and Okabe M.: in ‘Ceramic to metal joining’, 905–911; 2000, Cambridge, Scientific Abstract Publishers.10.2472/jsms.49.905 ↗
8. Meltzer R. L. ‘Annual book of ASTM standards’,Vol. 10.04, 97-100; 1988, Philadelphia, PA, ASTM.
9. http://www.patentstorm.us/patents/ 5116646/description.html