journal article·2022-05

The anisotropic fatigue properties of extruded Al–Zn–Mg–Cu alloy

Yiwen Peng, Junwen Zhao, Chaoqun Wang, Ruipeng Han, Yifeng Liu

Materials Science and Technology· Volume 38· Issue 8
Publisher page

Abstract

The effect of specimen orientation on the fatigue properties of extruded Al–Zn–Mg–Cu alloy was investigated, and the relationship between tensile properties and fatigue strength was established. The results show that the fatigue properties of specimens vary largely with the orientation. The specimens with 0° orientation (relative to extrusion direction) have the highest fatigue strength, i.e. 301.3 MPa, whereas the fatigue strength of specimens with 45°and 90° orientation was reduced by 13.3% and 33.5%, respectively. The fatigue strength is linearly proportional to the elongation. It was found that the crack propagation modes vary with specimen orientation, a result of the grain orientation and intergranular coarse second phase particles, leading to the difference in fatigue lives. In addition, Basquin equations for specimens in the three directions were proposed for fatigue life prediction.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Lab of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, People's Republic of China

China Southwest Architectural Design and Research Institute Corporation Ltd, Chengdu, People's Republic of China

Funding

Sichuan Province Science and Technology Support Program

References (24)

Show source-provided references
1. 10.1016/0036-9748(83)90169-210.1016/0036-9748(83)90169-2 ↗
2. Ma ZF · J Aeronaut Mater · 2015 · 35 · 1
3. Yang Y · Adv Mat Res · 2013 · 740 · 745
4. 10.1016/j.msea.2012.03.00510.1016/j.msea.2012.03.005 ↗
5. 10.1016/S1359-6454(03)00363-X10.1016/S1359-6454(03)00363-X ↗
6. 10.1016/j.matdes.2005.04.01010.1016/j.matdes.2005.04.010 ↗
7. 10.1007/s12613-015-1129-410.1007/s12613-015-1129-4 ↗
8. 10.1016/j.msea.2014.08.04010.1016/j.msea.2014.08.040 ↗
9. 10.4028/www.scientific.net/MSF.710.53910.4028/www.scientific.net/MSF.710.539 ↗
10. 10.1016/j.actamat.2009.04.04610.1016/j.actamat.2009.04.046 ↗
11. 10.1016/j.ijfatigue.2021.10631710.1016/j.ijfatigue.2021.106317 ↗
12. Wei-cai R · Light Alloy Fabric Technol · 2019 · 47 · 9
13. 10.1179/02670830222500756510.1179/026708302225007565 ↗
14. 10.1016/j.msea.2004.01.12910.1016/j.msea.2004.01.129 ↗
15. 10.1016/j.matchar.2017.07.02510.1016/j.matchar.2017.07.025 ↗
16. 10.1016/j.ijfatigue.2014.03.00910.1016/j.ijfatigue.2014.03.009 ↗
17. 10.1111/ffe.1353010.1111/ffe.13530 ↗
18. 10.3390/ma1416450610.3390/ma14164506 ↗
19. Zhang X · Acta Metall Sin · 2015 · 51 · 257
20. 10.1016/j.matdes.2013.12.00210.1016/j.matdes.2013.12.002 ↗
21. 10.1016/j.ijfatigue.2016.05.01710.1016/j.ijfatigue.2016.05.017 ↗
22. Nakazawa H · Stat Res Fatigue Fract · 1987 · 2 · 59
23. Buch A. · Trans Tech Pubn · 1988
24. 10.1016/j.msea.2012.11.10310.1016/j.msea.2012.11.103 ↗