Evaluation of quantitative hot cracking criteria
Source abstract
Abstract
The research aims to evaluate the quantitative hot cracking criteria. The quantitative criteria, i.e. the SKK (Suyitno–Kool–Katgerman) and the modified SKK criteria were implemented with various parameters such as the cooling rate, strain rate, grain diameter, packing parameter, Mg content in Al9ZnxMg2Cu, and Cu content in Al9Zn2MgxCu. The validation of the result is also conducted by comparing the implementation result with the experimental data. The results show that the hot cracking initiation based on the SKK criterion occurs at lower stress and higher solid fraction than that based on the modified SKK criterion. This means that hot cracking initiation based on the SKK criteria occurs earlier than that based on the modified SKK criteria. Based on the modified SKK criterion, the critical stress initially decreases sharply and then increases gradually with solid fraction, whereas the critical stress remains decreased based on the SKK criterion.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Faculty of Engineering, Universitas Tidar, North Magelang, Indonesia
Centre for Innovation of Medical Equipment and Devices (CIMEDs), Universitas Gadjah Mada, Yogyakarta, Indonesia
Mechanical Engineering, Institut Teknologi Sumatera (ITERA), South Lampung, Indonesia
Department of Mechanical and Industrial Engineering Department, Engineering Faculty, Universitas Gadjah Mada, Yogyakarta, Indonesia
Funding
Indonesian Ministry of Higher Education · Universitas Gadjah Mada
References (36)
Show source-provided references
1. Suyitno S. · 2005
2. Campbell J. · 2011
3. Campbell J. · 1991
4. Li S · Int J Met Cast · 2011 · 5 · 23
5. Li Y · Prog Mater Sci · 2021 · 117
6. NovikovII. Goryachelomkost Tsvetnykh Metallovi Splavov (Hot shortness of non-ferrous metals and alloys) 299; 1966.
7. Dickhaus CH · AFS Trans · 1994 · 101 · 677
8. 10.1007/s11663-001-0124-510.1007/s11663-001-0124-5 ↗
9. 10.4028/www.scientific.net/MSF.331-337.16710.4028/www.scientific.net/MSF.331-337.167 ↗
10. Williams JA · J Inst Met · 1968 · 96 · 5
11. 10.1007/s11661-005-0245-610.1007/s11661-005-0245-6 ↗
12. Suyitno Kool WH · Light Met · 2003 · 753
13. 10.1080/13640461.2000.1181939910.1080/13640461.2000.11819399 ↗
14. 10.1016/S0079-6425(03)00037-910.1016/S0079-6425(03)00037-9 ↗
15. Prokhorov NN. · Rus Cast Prod · 1962 · 2 · 172
16. 10.1007/s11661-999-0334-z10.1007/s11661-999-0334-z ↗
17. Braccini M · Weld Adv Solid Proc IX · 2000 · 18
18. 10.1007/s11661-006-0188-610.1007/s11661-006-0188-6 ↗
19. 10.1007/s11661-004-0238-x10.1007/s11661-004-0238-x ↗
20. Clyne TW · Met Soc · 1979 · 275
21. Katgerman L. · J Met · 1982 · 34 · 46
22. 10.1016/j.actamat.2015.01.03410.1016/j.actamat.2015.01.034 ↗
23. 10.1007/s11661-009-9941-y10.1007/s11661-009-9941-y ↗
24. Bai QL · Mater Sci Technol · 2015 · 32 · 1
25. 10.1016/0001-6160(76)90015-810.1016/0001-6160(76)90015-8 ↗
26. Griffith AA. · 54
27. 10.1098/rsta.1921.000610.1098/rsta.1921.0006 ↗
28. 10.1016/S1471-5317(02)00042-110.1016/S1471-5317(02)00042-1 ↗
29. 10.2320/matertrans.47.291810.2320/matertrans.47.2918 ↗
30. 10.1007/s11661-010-0268-510.1007/s11661-010-0268-5 ↗
31. 10.1007/s11661-019-05268-z10.1007/s11661-019-05268-z ↗
32. Kurz W · 1992
33. Touloukian YS · 1970
34. 10.1007/s11661-014-2220-610.1007/s11661-014-2220-6 ↗
35. Subroto T · Mater Sci Eng · 2016 · 676 · 2810.1016/j.msea.2016.08.090 ↗
36. Sweet L · 2012 · 1133