Determination of optimal location to monitor temperature in low pressure die casting process
Source abstract
Abstract
Controlling and eliminating defects, such as macroporosity, in castings is a continuing challenge that manufacturers must continually address. Since the encapsulation of liquid regions by a solid shell and subsequent formation of macroporosity cannot be detected during casting, the die temperature, which is routinely measured, has been used as an indirect indicator of this defect. A finite element model has been developed to predict the evolution of temperature as well as the volume of encapsulated liquid in a casting with a high propensity to form macroporosity. The boundary conditions in the model were iteratively adjusted until the temperature predictions matched the experimental data for a variety of operational conditions. A model based methodology has been developed to analyse the correlation between the die temperature and the encapsulated liquid volume. This methodology is employed to assess the suitability of different in-cycle die temperatures for use as indicators of macroporosity formation, and to help determine the optimal location to monitor temperature for the purpose of minimising macroporosity.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electrical and Computer Engineering University of British Columbia, 5643 Yalta Place, Vancouver, BC V6T 1L7, Canada
Department of Materials Engineering University of British Columbia, Frank Forward Building, 309-6350 Stores Road, Vancouver, BC, Canada, V6T 124
References (18)
Show source-provided references
1. Bonollo F · Metall. Ital. · 2005 · 6 · 23
2. Zhang B · Mater. Sci. Eng. A · 2007 · 465 · 29510.1016/S0921-5093(07)01356-1 ↗
3. Andresen B: ‘Die casting engineering’; 2005, New York, Marcel Dekker.
4. Esdaile R, Nguyen T, de Looze G, Murray M: Proc. 1st Int. Non-Ferrous Processing and Technology Conf., 213–218; 1997, Warrendale, PA, USA, TMS International.
5. Muller W · AFS Trans. · 1996 · 104 · 1111
6. Singh D · AFS Trans. · 1999 · 99 · 127
7. 10.1049/cce:1994030710.1049/cce:19940307 ↗
8. 10.1007/s00170-008-1640-010.1007/s00170-008-1640-0 ↗
9. 10.1179/174328407X15726310.1179/174328407X157263 ↗
10. Jeffery L · Modern Cast. · 1998 · 88 · 49
11. Bishenden W, Bhola R: ‘Die temperature control’, Proc. 20th Int. Die Casting Cong. and Exposition, Cleveland, OH, USA, November 1999, North American Die Casting Association, 161–164.
12. 10.1179/02670830422501119910.1179/026708304225011199 ↗
13. American Society for Metals: ‘ASM metals reference’, 2nd edn; 1984, Metals Park, OH, ASM.
14. 10.1533/978184569014410.1533/9781845690144 ↗
15. 10.1007/978-3-642-01384-310.1007/978-3-642-01384-3 ↗
16. 10.1016/j.msea.2004.03.00610.1016/j.msea.2004.03.006 ↗
17. 10.1080/00224065.1985.1197896410.1080/00224065.1985.11978964 ↗
18. 10.1002/qre.468004011210.1002/qre.4680040112 ↗