journal article·2010-03

Recrystallisation processes in cold rolled low carbon steel strip containing different starting microstructures

W. Xu, M. Ferry

Materials Science and Technology· Volume 26· Issue 3
Publisher page

Abstract

The effect of initial microstructure [acicular ferrite (AF); polygonal ferrite (PF); fine polygonal ferrite (FPF); bainite (B)] on the recrystallisation behaviour of cold rolled low carbon (LC) steel strip was investigated. Steel strip samples of 2 mm thickness were heat treated to produce FPF, PF, AF and B. The resulting materials, together with a twin roll cast LC strip containing predominantly acicular ferrite (SC), were cold rolled to 50, 70 and 90% reduction and annealed for various times in the temperature range 580–680°C. The evolution of microstructure during rolling and recrystallisation was studied by optical microscopy, electron backscatter diffraction in SEM and TEM. The initial microstructure was found to have a substantial influence on the annealing behaviour. Recrystallisation was structure dependent with the rate of recrystallisation shown as FPF>B>PF>AF>SC during annealing at temperatures in the range 580–680°C. Both partly and fully recrystallised materials exhibited approximately lognormal grain size distributions with the PF and B having the largest and smallest average grain sizes and standard deviations and the smallest and largest skewness respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and EngineeringUniversity of New South Wales, Sydney, New South Wales 2052, Australia

References (16)

Show source-provided references
1. Cramb W. ‘Near-net-shape casting in the minimills’, 355; 1995, Vancouver, Canadian Institute of Mining, Metallurgy and Petroleum.
2. Ferry M. ‘Direct strip casting of metals and alloys’; 2006,Cambridge, Woodhead Publishing.10.1533/9781845691660 ↗
3. Castrip Press Room, August 2004, www.castrip.com.
4. Blejde W., Mahapatra R., and Fukase H.: Iron Steelmaker, 2000,
5. 10.1179/02670830110150957510.1179/026708301101509575 ↗
6. 10.1179/cmq.2001.40.4.52310.1179/cmq.2001.40.4.523 ↗
7. Bhadeshia H. K. D. H. ‘Bainite in steels’, 2nd edn; 2001, London,IoM Communications.
8. Humphreys F. J., and Hatherly M. ‘Recrystallisation and related
9. 10.1016/0036-9748(89)90510-310.1016/0036-9748(89)90510-3 ↗
10. 10.1179/imr.1994.39.4.12910.1179/imr.1994.39.4.129 ↗
11. Christian J. W. ‘The theory of transformations in metals and alloys’, 2nd edn; 2002, Oxford, Pergamon.10.1016/B978-008044019-4/50022-2 ↗
12. 10.1016/S0921-5093(02)00510-510.1016/S0921-5093(02)00510-5 ↗
13. 10.1016/S0921-5093(01)01715-410.1016/S0921-5093(01)01715-4 ↗
14. Simpson I. D. · Met. Forum · 1982 · 5 · 32
15. 10.1016/j.jmatprotec.2007.10.06910.1016/j.jmatprotec.2007.10.069 ↗
16. Manohar P. A., Ferry M., and Chandra T.: ISIJ Int. 1998, 38, 913.10.2355/isijinternational.38.913 ↗