journal article·2014-04

On corrosion behaviour of HVOF sprayed Ni3Si intermetallic powders

M. M. Verdian, K. Raeissi, M. Salehi

Materials Science and Technology· Volume 30· Issue 4
Publisher page

Abstract

Ni3Si intermetallic powders were deposited onto 420 stainless steel substrate using high velocity oxy-fuel (HVOF) process. In this regard, microstructure properties relationships were evaluated in fabricated coatings. X-ray diffractometery, scanning electron microscopy, microhardness testing, potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) measurements were performed to study the phase composition, microstructure and properties of the coatings. The microstructure of coatings was composed of supersaturated Ni(Si) solid solution islands embedded in an Ni5Si2 matrix. The results showed that this microstructure strongly affected properties of coatings. In this regard, the hardness of coatings was found to be 620 HV(50 g) due to presence of Ni5Si2. It was also found that the corrosion rate of HVOF Ni–Si coatings in 70H2SO4 medium was lower than that of stainless steel substrate. Further investigations showed that the microgalvanic corrosion between Ni(Si) and Ni5Si2 phases was a determinant factor in corrosion performance of HVOF Ni–Si coatings.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering Isfahan University of Technology, Isfahan 84156-83111, Iran

References (29)

Show source-provided references
1. 10.1179/1743284713Y.000000021810.1179/1743284713Y.0000000218 ↗
2. 10.1179/1743284712Y.000000006910.1179/1743284712Y.0000000069 ↗
3. 10.1179/174328407X17692910.1179/174328407X176929 ↗
4. 10.1179/174328407X17692910.1179/174328407X176929 ↗
5. Zhang S. ‘The development of nickel silicide based alloy for sulfuric acid application’, PhD thesis, University of Missouri-Rolla, Rolla, MO, USA, 2000.
6. Larson C. M. ‘The corrosion of Ni3Si alloys in sulfuric acid’, Masters’ thesis, University of Missouri-Rolla, Rolla, MO, USA, 2009.
7. 10.1179/02670830110151055510.1179/026708301101510555 ↗
8. 10.1179/02670830077300268110.1179/026708300773002681 ↗
9. 10.4028/www.scientific.net/KEM.368-372.131910.4028/www.scientific.net/KEM.368-372.1319 ↗
10. McNelis K., Newkirk J., and Van Aken D., Proc. 3rd Int. Surf. Eng. Cong., Orlando, FL, USA, August 2004, Orlando Airport Marriott, 18–27.
11. Tiainen T. J., Lagerbom J., Sitonen P., and Vuorinen J. E., Proc. 1995 Int. Conf. & Exhib. on ‘Powder metallurgy & partuculate materials’, Seattle, WA, USA, May 1995, Metal Powder Industries Federation and APMI International, 149–160.
12. 10.1016/j.surfcoat.2007.02.02210.1016/j.surfcoat.2007.02.022 ↗
13. 10.1016/j.surfcoat.2011.03.03110.1016/j.surfcoat.2011.03.031 ↗
14. 10.1002/978047075408510.1002/9780470754085 ↗
15. Davis J. R. ‘Handbook of thermal spray technology’, 2008, Materials Park, OH, ASM International.
16. 10.1007/s11595-009-6883-610.1007/s11595-009-6883-6 ↗
17. 10.1016/j.surfcoat.2011.07.05610.1016/j.surfcoat.2011.07.056 ↗
18. 10.1016/j.intermet.2009.04.00610.1016/j.intermet.2009.04.006 ↗
19. 10.1179/174329406X12285610.1179/174329406X122856 ↗
20. 10.1179/026708309X1251274415428910.1179/026708309X12512744154289 ↗
21. 10.1179/026708309X1245943050937310.1179/026708309X12459430509373 ↗
22. 10.1179/174328408X32221310.1179/174328408X322213 ↗
23. 10.1016/j.apsusc.2012.08.04310.1016/j.apsusc.2012.08.043 ↗
24. 10.1016/0956-7151(94)90397-210.1016/0956-7151(94)90397-2 ↗
25. 10.1016/S0921-5093(00)00774-710.1016/S0921-5093(00)00774-7 ↗
26. 10.1016/j.apsusc.2013.02.05710.1016/j.apsusc.2013.02.057 ↗
27. 10.1016/j.corsci.2009.11.03410.1016/j.corsci.2009.11.034 ↗
28. 10.1016/S0010-938X(02)00030-610.1016/S0010-938X(02)00030-6 ↗
29. 10.1016/j.corsci.2005.10.01610.1016/j.corsci.2005.10.016 ↗