journal article·2015-09

Correlation between ductile-to-brittle transition behaviour and twinning in ferritic stainless steel

F. Gao, F.-X. Yu, R. D. K. Misra, H.-T. Liu, Z.-Y. Liu

Materials Science and Technology· Volume 31· Issue 12
Publisher page

Abstract

In this work, the 18Cr–2Mo ferritic stainless steel was treated with and without warm rolling at 573 K with 66.5 reduction after conventional hot rolling process. It was shown that ductile-to-brittle transition behaviour could be closely related to deformation twinning and parameters affecting critical temperature for twinning would also inevitably affect ductile-to-brittle transition temperature. This correlation between ductile-to-brittle transition behaviour and twinning was in good agreement with the Cottrell–Petch model. A lowered transition temperature and an improved toughness after introducing warm rolling process and corresponding annealing process could be mainly explained in terms of refining the recrystallised grains and reducing the volume fraction of grains having orientations favourable for twinning, which decrease the critical temperature at which twins form.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials and Metallurgy Northeastern University, Shenyang 110819, China

Department of Metallurgical and Materials Engineering and Center for Structural and Functional Materials Research and Innovation University of Texas at El Paso, TX 79968-0521, USA

State Key Laboratory of Rolling and Automation Northeastern University, Shenyang 110819, China

References (50)

Show source-provided references
1. 10.1016/j.mser.2009.03.00110.1016/j.mser.2009.03.001 ↗
2. 10.1007/s11661-012-1265-710.1007/s11661-012-1265-7 ↗
3. Kang X F (ed.): ‘Ferritic stainless steels’, 14–19; 2012, Beijing, Metallurgical Industry Press.
4. 10.1520/STP38201S10.1520/STP38201S ↗
5. 10.2355/isijinternational.38.100710.2355/isijinternational.38.1007 ↗
6. 10.1520/STP38205S10.1520/STP38205S ↗
7. 10.1016/0308-0161(93)90114-910.1016/0308-0161(93)90114-9 ↗
8. 10.1007/BF0266163410.1007/BF02661634 ↗
9. 10.1007/BF0265883210.1007/BF02658832 ↗
10. 10.1016/j.actamat.2004.10.05110.1016/j.actamat.2004.10.051 ↗
11. 10.1016/j.actamat.2005.07.00910.1016/j.actamat.2005.07.009 ↗
12. 10.2320/jinstmet.71.28410.2320/jinstmet.71.284 ↗
13. 10.1115/1.290318710.1115/1.2903187 ↗
14. 10.1016/j.engfracmech.2004.03.01010.1016/j.engfracmech.2004.03.010 ↗
15. 10.1007/s10704-006-0035-110.1007/s10704-006-0035-1 ↗
16. 10.1016/S0921-5093(00)00828-510.1016/S0921-5093(00)00828-5 ↗
17. 10.1016/S0921-5093(01)01347-810.1016/S0921-5093(01)01347-8 ↗
18. 10.1016/0001-6160(58)90060-910.1016/0001-6160(58)90060-9 ↗
19. ‘Metallic materials – Charpy impact testing method’, National standard of the People's Republic of China GB/T 229–2007, State Bureau of Quality and Technical Supervision, Beijing, China, 2007.
20. 10.2355/isijinternational.37.69710.2355/isijinternational.37.697 ↗
21. Gao F · Acta Metall. Sin. Engl. Lett. · 2011 · 24 · 343
22. 10.1179/imtlr.1973.18.2.4310.1179/imtlr.1973.18.2.43 ↗
23. 10.1016/0036-9748(82)90471-910.1016/0036-9748(82)90471-9 ↗
24. 10.1016/0036-9748(87)90128-110.1016/0036-9748(87)90128-1 ↗
25. 10.1016/S0925-8388(99)00401-610.1016/S0925-8388(99)00401-6 ↗
26. 10.1023/A:100873982026110.1023/A:1008739820261 ↗
27. 10.1016/j.ijfatigue.2012.06.01810.1016/j.ijfatigue.2012.06.018 ↗
28. 10.1023/A:100678522017610.1023/A:1006785220176 ↗
29. 10.1080/0950083950824246710.1080/09500839508242467 ↗
30. 10.1016/S0921-5093(03)00171-010.1016/S0921-5093(03)00171-0 ↗
31. 10.1016/0079-6425(94)00007-710.1016/0079-6425(94)00007-7 ↗
32. 10.1007/BF0264853410.1007/BF02648534 ↗
33. Stroh AN · Proc. R. Soc. Lond. A · 1954 · 223 · 40410.1098/rspa.1954.0124 ↗
34. 10.1016/j.msea.2012.01.05010.1016/j.msea.2012.01.050 ↗
35. 10.1016/S1359-6454(01)00300-710.1016/S1359-6454(01)00300-7 ↗
36. 10.1520/STP38200S10.1520/STP38200S ↗
37. Petch N J (ed.): ‘Fracture’, 305; 1959, New York, Wiley.
38. 10.1016/j.scriptamat.2008.02.05210.1016/j.scriptamat.2008.02.052 ↗
39. 10.1016/j.msea.2010.02.04110.1016/j.msea.2010.02.041 ↗
40. Wang SH · Acta Metall. Sin. · 2009 · 45 · 1083
41. 10.1016/j.scriptamat.2008.05.02710.1016/j.scriptamat.2008.05.027 ↗
42. 10.1016/S1359-6454(99)00383-310.1016/S1359-6454(99)00383-3 ↗
43. 10.1016/j.scriptamat.2006.06.00410.1016/j.scriptamat.2006.06.004 ↗
44. Kakani SL and Kakani A (ed.): ‘Material science’, 348–371; 2004, New Delhi, New Age International Publishers.
45. 10.1016/0956-7151(94)90283-610.1016/0956-7151(94)90283-6 ↗
46. 10.1016/0013-7944(73)90007-610.1016/0013-7944(73)90007-6 ↗
47. 10.1016/0022-3697(87)90118-110.1016/0022-3697(87)90118-1 ↗
48. 10.1007/s10704-008-9232-410.1007/s10704-008-9232-4 ↗
49. 10.1016/j.matchar.2006.02.01510.1016/j.matchar.2006.02.015 ↗
50. 10.1016/S0921-5093(00)01995-X10.1016/S0921-5093(00)01995-X ↗