journal article·2010-11

Effects of liquid–liquid transition on solidification of Sb–10 wt-%Cu alloy

F. Q. Zu, L. N. Mao, C. M. Hu, J. Chen, Z. Y. Huang, Y. C. Liu, M. Q. Liu

Materials Science and Technology· Volume 26· Issue 11
Publisher page

Abstract

The electrical resistivity of the liquid Sb–10 wt-%Cu alloy as a function of temperature was measured using direct current four probe technique. In a relatively high temperature zone above the liquidus, the resistivity–temperature ( ρ – T ) curves of the melt change abnormally; moreover, the changing pattern in the first heating process is completely different from the ones in the subsequent heating and cooling cycles. Since resistivity is a structural sensitive parameter, these abnormal changes of ρ – T curves indicate that the temperature-induced liquid–liquid structure transitions (L-LSTs) probably occur in Sb–10 wt-%Cu melt, with some reversible characters. To explore the effects of the L-LST on the solidification behaviours and solidified microstructures of this alloy, solidification experiments were further carried out according to the temperature ranges with anomalous changes on ρ – T curves. Results show that after the melt experienced the L-LST, larger undercooling, shorter solidified time and much finer microstructures with differently microscopic patterns could be obtained.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Thermodynamic and Structural Properties of Metals and Alloys · Material Dynamics and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Liquid/Solid Metal Processing InstituteSchool of Materials Science & Engineering, Hefei University of Technology, Hefei 230009, China;, Email: fangqiuzu@hotmail.com

Liquid/Solid Metal Processing InstituteSchool of Materials Science & Engineering, Hefei University of Technology, Hefei 230009, China

References (33)

Show source-provided references
1. 10.1103/PhysRevLett.79.366410.1103/PhysRevLett.79.3664 ↗
2. 10.1063/1.37311310.1063/1.373113 ↗
3. 10.1016/j.physleta.2004.03.01410.1016/j.physleta.2004.03.014 ↗
4. 10.1103/PhysRevLett.89.12550510.1103/PhysRevLett.89.125505 ↗
5. 10.1103/PhysRevB.70.24521410.1103/PhysRevB.70.245214 ↗
6. 10.1103/PhysRevB.71.06420410.1103/PhysRevB.71.064204 ↗
7. 10.1103/PhysRevB.73.02420110.1103/PhysRevB.73.024201 ↗
8. 10.1126/science.275.5298.32210.1126/science.275.5298.322 ↗
9. 10.1016/S0022-3093(99)00287-210.1016/S0022-3093(99)00287-2 ↗
10. 10.1016/S0924-0136(02)01007-510.1016/S0924-0136(02)01007-5 ↗
11. 10.1016/S0167-577X(00)00011-210.1016/S0167-577X(00)00011-2 ↗
12. 10.1016/S0921-5093(01)01864-010.1016/S0921-5093(01)01864-0 ↗
13. 10.1126/science.280.5369.155010.1126/science.280.5369.1550 ↗
14. Lo Ts., Dobler S., and Plapp M.: Acta Mater., 2003, 51, 599.10.1016/S1359-6454(02)00440-8 ↗
15. 10.1080/0031910070134459410.1080/00319100701344594 ↗
16. Demo P. · Mater. Phys · 2003 · 6 · 43
17. 10.21608/ejs.2001.15049410.21608/ejs.2001.150494 ↗
18. Waseda Y. ‘The structure of non-crystalline materials - liquid and amorphous solids’, 262-263; 1980, New York, McGraw-Hill.
19. 10.1016/0022-3093(89)90055-010.1016/0022-3093(89)90055-0 ↗
20. 10.1016/0022-3093(84)90561-110.1016/0022-3093(84)90561-1 ↗
21. 10.1103/PhysRevB.47.500210.1103/PhysRevB.47.5002 ↗
22. 10.1016/S0022-3093(96)00473-510.1016/S0022-3093(96)00473-5 ↗
23. 10.1080/0031910730808382110.1080/00319107308083821 ↗
24. Mitsuo S. ‘Liquid metals’; 1977, London, Academic Press.
25. 10.1515/zna-1947-090610.1515/zna-1947-0906 ↗
26. Wilson J. R.: Metall Rev. 1965, 10, 381.10.1179/095066065790138401 ↗
27. 10.1149/1.242870010.1149/1.2428700 ↗
28. 10.1179/174328406X7424810.1179/174328406X74248 ↗
29. 10.1142/S021798490600903710.1142/S0217984906009037 ↗
30. 10.1088/0031-8949/73/2/01010.1088/0031-8949/73/2/010 ↗
31. 10.1038/3504853710.1038/35048537 ↗
32. 10.1088/0953-8984/8/34/00310.1088/0953-8984/8/34/003 ↗
33. 10.1088/0953-8984/3/20/02410.1088/0953-8984/3/20/024 ↗