journal article·2011-04

Strain aging behaviour of cold rolled multiphase steel

F D Murari, T M Füzessy de Melo, B M Gonzalez

Materials Science and Technology· Volume 27· Issue 4
Publisher page

Abstract

The bake hardening behaviour of cold rolled multiphase steel, processed to a minimum yield strength of 250 MPa and a minimum tensile strength of 450 MPa, was evaluated within a range of tensile prestrain of up to 20% by means of aging experiments and tensile tests. The influence of room temperature aging time on the steel's mechanical properties and Lüders strain was also examined. It was found that, after reaching a peak value at a prestrain level of between 0·5 and 1·0%, the bake hardening parameter began to decrease upon reaching higher levels of prestrain. This behaviour was explained in terms of changes in the dislocation structure and dislocation interaction with dissolved carbon atoms. Concerning the natural aging behaviour, no significant influence of room temperature aging time on the mechanical properties could be detected. Moreover, the appearance of Lüders strain was not observed during a 6 month evaluation period, indicating that the investigated steel possesses a natural non-aging behaviour.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Usiminas Superintendence of Research and Development, Av. Pedro Linhares Gomes, 5431, 35160-900, Ipatinga, MG, Brazil

Department of Metallurgical and Materials Engineering Universidade Federal de Minas Gerais (UFMG), MG, Brazil

References (19)

Show source-provided references
1. De AK, Vandeputte S, de Cooman BC: Proc. 43rd MWSP Conf., Warrendale, PA, USA, October 2001, ISS, Vol. XXXIX569–581.
2. 10.1002/srin.19930104910.1002/srin.199301049 ↗
3. 10.1007/s11661-998-0126-x10.1007/s11661-998-0126-x ↗
4. Bleck W, Brühl S: Proc. Conf. on ‘New developments on metallurgy and applications of high strength steels’, Buenos Aires, Argentina, May 2008, Ternium, Tenaris and Asociacion Argentina de Materiales.
5. Krieger M, Janecek M, Estrin Y: Proc. 3rd Int. Conf. on ‘Thermo-mechanical processing of steels’, Padua, Italy, September 2008, Associazione Italiana di Metallurgia.
6. 10.1007/s11661-008-9605-310.1007/s11661-008-9605-3 ↗
7. Hance TBM, Link TM, Hoydick DP: Proc. 45th MWSP Conf., Chicago, IL, USA, October 2003, ISS, 195–206.
8. 10.1179/02670830222500245210.1179/026708302225002452 ↗
9. Tanikawa K · NKK Tech. Rev. · 1995 · 72 · 10
10. Hance BM: Proc. 42nd MWSP Conf., Toronto, Ont., Canada, October 2000, ISS, Vol. XXXVIII, 607–620.
11. Murari FD, Melo TMF, Castro I: Usiminas, private communication, February 2006.
12. Tanaka T, Nishida M, Hashiguchi K, Kato T: ‘Structure and properties of dual phase steels’, 221–241; 1979, New York, TMS–AIME.
13. 10.1007/s11661-003-1006-z10.1007/s11661-003-1006-z ↗
14. ‘Multi phase and ultra high strength sheet steel’, GMW3399, IHS, Lexington, MA, USA, 2006, 1–14.
15. Llewellyn DT · Ironmaking Steelmaking · 1996 · 23 · 471
16. Speich GR: Proc. Conf. on ‘Fundamentals of dual-phase steels’, Chicago, IL, USA, February, 1981, TMS–AIME, 3–45.
17. 10.1007/s11661-007-9258-710.1007/s11661-007-9258-7 ↗
18. Tao X, Birosca S, Kim HS, de Cooman BC: Proc. Conf. on ‘Advanced high-strength and other speciality sheet Products for the automotive industry’, Detroit, MI, USA, September 2007, MS&T, 49–60.
19. Murari FD, Lobo AR, Guimarães GW: Usiminas, private communication, March 2008.