Microstructures and properties of copper matrix composite wires reinforced with Ti 2 SnC particles
Source abstract
Abstract
This study investigates the fabrication of copper matrix composite reinforced with 8 wt-% of the Ti 2 SnC phase using friction stir-back extrusion. It explores the effect of rotational speed on the microstructure and properties of Cu–Ti 2 SnC wire composites. The results showed that the grain size of the composite increased from 3.5 ± 0.6 to 5.7 ± 0.5 µm as the rotation speed increased from 400 to 1000 rev min −1 . With the addition of the Ti 2 SnC phase, the yield and ultimate tensile strength increased by 178% and 33%, respectively. In addition, although the electrical conductivity decreased by 25% by adding 8 wt-% of reinforcement, the electric conductivity of composite wire increased by 19% with the increase of the rotation speed from 400 to 1000 rev min −1 .
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Engineering, Babol Noshirvani University of Technology, Babol, Iran
References (38)
Show source-provided references
1. 10.1177/002199831985183110.1177/0021998319851831 ↗
2. 10.1177/002199831987668410.1177/0021998319876684 ↗
3. 10.1504/IJMPT.2016.07549710.1504/IJMPT.2016.075497 ↗
4. Mahallawy NE · J Compos Mater · 2017 · 21 · 13
5. 10.1016/j.rinp.2019.10291110.1016/j.rinp.2019.102911 ↗
6. 10.1177/0954408921103402910.1177/09544089211034029 ↗
7. 10.1142/S0218625X2250130X10.1142/S0218625X2250130X ↗
8. Akbari M · Int J Lightweight Mater Manuf · 2022 · 5 · 213
9. 10.1016/j.aej.2022.09.03610.1016/j.aej.2022.09.036 ↗
10. 10.3390/math1008126610.3390/math10081266 ↗
11. 10.1177/002199832093486010.1177/0021998320934860 ↗
12. 10.3390/lubricants1011027710.3390/lubricants10110277 ↗
13. 10.1007/BF0036968510.1007/BF00369685 ↗
14. 10.1016/j.jallcom.2020.15647510.1016/j.jallcom.2020.156475 ↗
15. 10.5829/idosi.ije.2013.26.04a.0610.5829/idosi.ije.2013.26.04a.06 ↗
16. 10.1177/002199831990065510.1177/0021998319900655 ↗
17. 10.1179/1743280410Y.000000000110.1179/1743280410Y.0000000001 ↗
18. 10.3390/ma1218294710.3390/ma12182947 ↗
19. Wu J · International Journal of Materials Research · 2005 · 96 · 847
20. Wu JY · 2007 · 429
21. 10.1016/j.msea.2006.02.01010.1016/j.msea.2006.02.010 ↗
22. 10.1515/ijmr-2005-022910.1515/ijmr-2005-0229 ↗
23. 10.1108/ILT-12-2019-050810.1108/ILT-12-2019-0508 ↗
24. 10.1016/j.ceramint.2022.08.25010.1016/j.ceramint.2022.08.250 ↗
25. 10.1016/j.jmapro.2021.03.05510.1016/j.jmapro.2021.03.055 ↗
26. 10.1002/adem.20220146310.1002/adem.202201463 ↗
27. 10.1007/s00170-021-07729-510.1007/s00170-021-07729-5 ↗
28. 10.1016/j.jmapro.2017.07.01010.1016/j.jmapro.2017.07.010 ↗
29. 10.1088/1361-651X/ab044b10.1088/1361-651X/ab044b ↗
30. 10.1016/j.procir.2019.02.06210.1016/j.procir.2019.02.062 ↗
31. 10.1016/j.rinp.2019.10281410.1016/j.rinp.2019.102814 ↗
32. 10.1016/j.msea.2018.02.00610.1016/j.msea.2018.02.006 ↗
33. 10.1016/j.jallcom.2020.15788810.1016/j.jallcom.2020.157888 ↗
34. 10.1016/j.triboint.2019.10606210.1016/j.triboint.2019.106062 ↗
35. 10.1007/s11249-019-1211-610.1007/s11249-019-1211-6 ↗
36. 10.1557/jmr.2008.012610.1557/jmr.2008.0126 ↗
37. 10.1016/j.pnsc.2013.01.01110.1016/j.pnsc.2013.01.011 ↗
38. 10.1080/02670836.2017.140790010.1080/02670836.2017.1407900 ↗