Temperature-dependent Charpy impact property of 3D printed 15-5 PH stainless steel
Source abstract
Abstract
In this study, the impact property of 3D printed 15-5 PH stainless steel was investigated at low (77 K), room (298 K), and high temperatures (723 K) using integrated experimental and modelling studies. The finite element model was based on the Johnson-Cook phenomenological material model and fracture parameters. The experimentally measured impact energies are 0.01, 6.78 ± 4.07, and 50.84 ± 3.39 J cm −2 , at the low, room, and high temperatures, respectively. The experimental and modelling predicted impact energies are in good agreement. The microstructures show that the steel exhibits a brittle behaviour at low and room temperatures as indicated by a transgranular fracture, but changes to a more ductile behaviour at high temperatures as illustrated by microvoid coalescence induced facture morphology.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High-Velocity Impact and Material Behavior · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Energy Engineering, Indiana University – Purdue University Indianapolis, Indianapolis, IN, USA
Department of Materials Convergence and System Engineering, Changwon National University, Changwon, Republic of Korea
Funding
Human Resources Program in Energy Technology · Power Generation & Electricity Delivery · Korea Institute of Energy Technology Evaluation and Planning · National Research Foundation of Kore · Korea government
References (24)
Show source-provided references
1. 10.1007/978-3-540-88445-310.1007/978-3-540-88445-3 ↗
2. 10.1007/s11665-017-2747-y10.1007/s11665-017-2747-y ↗
3. 10.1146/annurev-matsci-070115-03202410.1146/annurev-matsci-070115-032024 ↗
4. Pitrmuc Z. Influence of process parameters and part orientation on mechanical properties for DMLS manufactured stainless steel AISI 316L. Conferences of Student Creative Activity, STC; 2017:9.
5. Hendrickson JW. Use of direct metal laser sintering for tooling in high volume Production. All Graduate Plan B and other Reports; 2015:724.
6. Montero Sistiaga M, Nardone S, Hautfenne C Effect of heat treatment of 316 l stainless steel produced by selective laser melting (slm). Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium; 2016:558–565.
7. AKSteel. 15-5 PH stainless steel product data bulletin. [cited 2020 Mar 20]. Available from: https://www.aksteel.com/sites/default/files/2018-01/155ph201706.pdf.
8. Herny E, Lours P, Andrieu E Evolution of microstructure and impact-strength energy in thermally and thermomechanically aged 15-5 PH. Proc Inst Mech Eng, Part L: J Mater: Design Appl. 2008; 222(4):299–304.
9. 10.1016/j.mechmat.2009.09.00910.1016/j.mechmat.2009.09.009 ↗
10. 10.1016/j.ijimpeng.2006.06.00210.1016/j.ijimpeng.2006.06.002 ↗
11. ASTM E23-16b standard test Methods for notched Bar impact testing of Metallic materials. ASTM International West Conshohocken PA; 2016.
12. 10.1007/s11665-017-3085-910.1007/s11665-017-3085-9 ↗
13. Ls-Dyna LS-DYNA User Manual LST an Ansys company; Livermore CA USA 2011.
14. Johnson GR, Cook WH. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings of the 7th International Symposium on ballistics; 1983.
15. Graves WT Liu D Palazotto AN. Topology Optimization of a Penetrating Warhead. 57th AIAA/ASCE/AHS/ASC Structures Structural Dynamics and Materials Conference; 2016:1509.10.2514/6.2016-1509 ↗
16. Materials A. Stainless Steel – Grade 15-5 PH (UNS S15500); 2013. Available from: https://www.azom.com/article.aspx?ArticleID=8199.
17. 10.1016/0013-7944(85)90052-910.1016/0013-7944(85)90052-9 ↗
18. Gross AJ. Towards the predictive modeling of ductile failure PhD thesis The University of Texas at Austin 2015.
19. Coffy K. Microstructure and chemistry evaluation of direct metal laser sintered 15-5 PH stainless steel [M.S. thesis]. University of Central Florida; 2014.
20. 10.1016/j.matdes.2016.06.06810.1016/j.matdes.2016.06.068 ↗
21. Hertzberg RW, Vinci RP, Hertzberg JL. Deformation and fracture mechanics of engineering materials, 5th ed. Hoboken, New Jersey, USA: Wiley; 2012.
22. 10.1038/s41427-020-0212-010.1038/s41427-020-0212-0 ↗
23. 10.1080/1745275100370389410.1080/17452751003703894 ↗
24. Sarkar S Dubey S Nath AK. Effect of heat treatment on impact toughness of selective laser melted stainless steel parts June 18–22 2018 College Station Texas USA Paper No: MSEC2018-6418 V001T01A005 ASME 2018 13th International Manufacturing Science and Engineering Conference 2018.