journal article·2021-01

In-situ studies and simulation of equiaxed solidification in Al–20Cu alloy

Shifeng Luo, Guangyu Yang, Jieming Chen, Lei Xiao, Wanxia Huang, Qingxi Yuan, Wanqi Jie

Materials Science and Technology· Volume 37· Issue 1
Publisher page

Abstract

The equiaxed solidification of Al–20Cu alloy under different cooling rates was investigated using in-situ synchrotron X-ray radiography. The results showed that mean grain size increases rapidly at the early stage of solidification, then reaches the final grain size gradually. And the change of final mean grain size with cooling rate follows d = 4132.3 × R −0.86 . In addition, the evolution of grain size in Al–20Cu alloy was also simulated by ProCAST software. The experimental and simulation results indicated that, in the range of the cooling rate (5.0–7.5 K min −1 ), the major factor influencing the final grain size is the maximum nucleation density, while the nucleation undercooling has an insignificant effect on the final grain size.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an, People's Republic of China

The Chinese Academy of Sciences, Institute of High Energy Physics, Beijing, People's Republic of China

Funding

National Key Research and Development Program of China · National Natural Science Foundation of China · Major Science and Technology · the 13th Five-Year Plan Period

References (25)

Show source-provided references
1. 10.1016/S1359-6454(01)00050-710.1016/S1359-6454(01)00050-7 ↗
2. 10.1179/174328408X29596210.1179/174328408X295962 ↗
3. 10.1016/j.msea.2012.11.01610.1016/j.msea.2012.11.016 ↗
4. 10.1016/j.jallcom.2019.06.00210.1016/j.jallcom.2019.06.002 ↗
5. 10.1016/j.mtla.2018.08.00810.1016/j.mtla.2018.08.008 ↗
6. 10.1016/j.actamat.2012.11.00810.1016/j.actamat.2012.11.008 ↗
7. 10.1016/j.actamat.2017.10.06710.1016/j.actamat.2017.10.067 ↗
8. 10.1007/BF0258622410.1007/BF02586224 ↗
9. 10.1016/j.actamat.2016.07.04710.1016/j.actamat.2016.07.047 ↗
10. 10.1103/PhysRevE.81.04260110.1103/PhysRevE.81.042601 ↗
11. 10.1016/j.jallcom.2017.05.30210.1016/j.jallcom.2017.05.302 ↗
12. 10.1016/j.actamat.2016.09.01310.1016/j.actamat.2016.09.013 ↗
13. 10.1016/j.jcrysgro.2016.06.03410.1016/j.jcrysgro.2016.06.034 ↗
14. 10.1016/j.ultsonch.2013.12.02410.1016/j.ultsonch.2013.12.024 ↗
15. 10.1016/j.actamat.2017.09.01010.1016/j.actamat.2017.09.010 ↗
16. 10.1007/s12540-009-0391-210.1007/s12540-009-0391-2 ↗
17. 10.1179/1743133615Y.000000002110.1179/1743133615Y.0000000021 ↗
18. 10.1016/j.jallcom.2016.02.15210.1016/j.jallcom.2016.02.152 ↗
19. 10.4028/www.scientific.net/SSP.197.8310.4028/www.scientific.net/SSP.197.83 ↗
20. 10.1007/s11663-000-0017-z10.1007/s11663-000-0017-z ↗
21. 10.1016/j.jcrysgro.2017.07.00110.1016/j.jcrysgro.2017.07.001 ↗
22. 10.1007/s12666-009-0058-110.1007/s12666-009-0058-1 ↗
23. 10.1016/j.matlet.2012.08.09410.1016/j.matlet.2012.08.094 ↗
24. 10.1016/j.jmst.2017.05.01110.1016/j.jmst.2017.05.011 ↗
25. Kurz W · 1989