journal article·2019-12

Microstructure and stability conditions for hot deformation of a modified iron-based superalloy

Manuel Carsí, Jaime Llaneza, Oscar A. Ruano

Materials Science and Technology· Volume 35· Issue 18
Publisher page

Abstract

A modified iron-based superalloy is studied regarding its hot formability. The microstructure contained particles of titanium carbides, carbonitrides and nitrates. Torsion tests at high strain rate at temperatures ranging from 800 to 1200°C were conducted. Results of these tests were correlated by means of the Garofalo hyperbolic sine creep relation. An optimum forming temperature of 1260°C at 10 s −1 is obtained. This temperature is strongly dependent on the strain rate. An activation energy for plastic deformation close to that for the activation energy for lattice diffusion in austenitic stainless steels and a stress exponent near 5 were obtained. These values suggest that plastic deformation is controlled by a dislocation climb mechanism.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Physical Metallurgy, CENIM-CSIC, Madrid, Spain

Funding

Comisión Interministerial de Ciencia y Tecnología

References (38)

Show source-provided references
1. Brickner KG · 1977
2. Truman JE. · 1992
3. 10.1002/3527607285.ch910.1002/3527607285.ch9 ↗
4. Sims CT, Stoloff NS, Hagel WC, editors. Superalloys II. New York ( NY): Wiley; 1987.
5. Incoloy alloy 800H, Special Metals, Publication SMC-046, 2004.
6. 10.1007/BF0266490210.1007/BF02664902 ↗
7. Prasad YVRK. · Ind J Technol · 1990 · 28 · 435
8. 10.1016/S0921-5093(97)00782-X10.1016/S0921-5093(97)00782-X ↗
9. Ziegler H. · 1963
10. 10.1007/s11661-017-4102-110.1007/s11661-017-4102-1 ↗
11. Carsí M · Z Metalkd · 2000 · 91 · 1057
12. 10.1007/BF0116598910.1007/BF01165989 ↗
13. 10.1080/0020717920893425310.1080/00207179208934253 ↗
14. Fields DS · Proc ASTM · 1957 · 57 · 1259
15. Garofalo F. · Trans AIME · 1963 · 227 · 1474
16. 10.1016/0924-0136(95)01957-G10.1016/0924-0136(95)01957-G ↗
17. 10.4028/www.scientific.net/MSF.941.232510.4028/www.scientific.net/MSF.941.2325 ↗
18. 10.1179/174328408X36942910.1179/174328408X369429 ↗
19. 10.1080/02670836.2018.145848010.1080/02670836.2018.1458480 ↗
20. 10.1080/02670836.2018.143769110.1080/02670836.2018.1437691 ↗
21. 10.1179/1743284712Y.000000008310.1179/1743284712Y.0000000083 ↗
22. 10.1093/imamci/9.4.27510.1093/imamci/9.4.275 ↗
23. Cunat PJ. · 2004
24. 10.1016/j.jallcom.2015.04.00810.1016/j.jallcom.2015.04.008 ↗
25. 10.3139/146.11060310.3139/146.110603 ↗
26. 10.1016/S0921-5093(01)01117-010.1016/S0921-5093(01)01117-0 ↗
27. 10.1016/0956-7151(91)90134-M10.1016/0956-7151(91)90134-M ↗
28. McQueen HJ · 1999 · 427
29. 10.1016/0025-5416(81)90100-210.1016/0025-5416(81)90100-2 ↗
30. 10.1016/0001-6160(61)90137-710.1016/0001-6160(61)90137-7 ↗
31. 10.2355/isijinternational.43.206210.2355/isijinternational.43.2062 ↗
32. Tanaka K · Res Mech · 1984 · 12 · 41
33. Malas JC · J Met · 1992 · 44 · 8
34. Gegel HL, Malas JC, Doraivelu SM, Modeling techniques used in forging process design. Metals handbook. Vol. 14. Metals Park, OH: ASM; 1987. p. 417–438.
35. Malas JCIII. Methodology for design and control of thermomechanical processes [PhD thesis]. Athens, OH: Ohio University; 1991.
36. 10.1007/978-3-642-52515-5_510.1007/978-3-642-52515-5_5 ↗
37. 10.1016/S0924-0136(00)00517-310.1016/S0924-0136(00)00517-3 ↗
38. 10.1016/j.jmatprotec.2004.09.08910.1016/j.jmatprotec.2004.09.089 ↗