Microstructural modification of Sn–Bi and Sn–Bi–Al immiscible alloys by shearing
Source abstract
Abstract
Sn–20 wt-%Bi and immiscible Sn–20 wt-%Bi–1 wt-%Al alloys were used to understand the effect of high-intensity shearing on microstructural refinement. Novel ACME (Axial Centrifugal Metal Expeller) shearing device, based on axial compressor and rotor–stator mechanism to generate high shear rate and intense turbulence, was used to condition the melts prior to solidification. Microstructure in the Sn–Bi alloy deviated from dendritic grains with coarse eutectic pockets under conventional solidification to compact grains with well-dispersed eutectic under semisolid-state shearing. Decreasing the shearing temperature and increasing shearing time increased the globularity of grains. Following shearing, remnant liquid solidified into fine grain structure. In the immiscible Sn–Bi–Al alloy, shearing produced uniform dispersion of refined Al-rich particles in Sn-rich matrix as opposed to severe segregation under conventional solidification. The primary effect of shearing appears to originate from the thermo-solutal homogenisation of the melt and its effect on interface stability during solidification.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Warwick Manufacturing Group, University of Warwick, Coventry, UK
Kroll Institute for Extractive Metallurgy, Colorado School of Mines, Golden, CO, USA
College of Engineering, Swansea University, Swansea, UK
References (25)
Show source-provided references
1. 10.1002/9783527603978.mst017310.1002/9783527603978.mst0173 ↗
2. 10.1179/174328006X10249310.1179/174328006X102493 ↗
3. 10.1016/S1359-6454(02)00305-110.1016/S1359-6454(02)00305-1 ↗
4. 10.1179/09506600122500104910.1179/095066001225001049 ↗
5. 10.1007/s11661-005-0030-610.1007/s11661-005-0030-6 ↗
6. 10.1201/b1727010.1201/b17270 ↗
7. 10.1016/j.matdes.2017.06.06510.1016/j.matdes.2017.06.065 ↗
8. 10.1016/j.jallcom.2014.09.08910.1016/j.jallcom.2014.09.089 ↗
9. 10.1007/s11661-010-0232-410.1007/s11661-010-0232-4 ↗
10. 10.1007/BF0265591910.1007/BF02655919 ↗
11. 10.1179/09506600122500107610.1179/095066001225001076 ↗
12. 10.1016/j.matlet.2009.12.03310.1016/j.matlet.2009.12.033 ↗
13. 10.1007/s11661-009-9918-x10.1007/s11661-009-9918-x ↗
14. 10.1016/j.scriptamat.2005.11.00210.1016/j.scriptamat.2005.11.002 ↗
15. 10.1016/j.actamat.2009.06.05210.1016/j.actamat.2009.06.052 ↗
16. 10.1016/j.matchemphys.2010.09.03510.1016/j.matchemphys.2010.09.035 ↗
17. 10.1007/BF0265122710.1007/BF02651227 ↗
18. Cassinath Z. International patent application number PCT/GB2015/052409; 2016.
19. 10.1088/1757-899X/114/1/01204210.1088/1757-899X/114/1/012042 ↗
20. 10.1016/S1359-6454(99)00052-X10.1016/S1359-6454(99)00052-X ↗
21. 10.1016/j.matchemphys.2011.09.02010.1016/j.matchemphys.2011.09.020 ↗
22. 10.1016/j.msea.2006.01.02310.1016/j.msea.2006.01.023 ↗
23. Kotadia HR · Adv Mat Res · 2014 · 1019 · 90
24. 10.1179/02670830322500211810.1179/026708303225002118 ↗
25. Lappa M. · 2004