journal article·2018-03

Effects of heat input on microstructure and mechanical properties of Fe–2Cr–Mo–0.12C steel

Qi-wen Wang, Chang-sheng Li, Jie Chen, Xing-yang Tu

Materials Science and Technology· Volume 34· Issue 5
Publisher page

Abstract

Thermal simulated specimens with the heat inputs of 20, 50 and 80 kJ/cm were used to investigate the effects of heat input on the microstructure and mechanical properties of the Fe–2Cr–Mo–0.12C pressure-vessel steel. The results indicated that the microstructures in the coarse-grained heat affected zone of tested steels with various heat inputs were mainly consisted of lath martensite and bainite ferrite. As the heat input increased, the fraction of martensite decreased and the bainite ferrite fraction increased. The toughness (tested at −40°C) and hardness for the heat input of 50 kJ/cm were 102 J and 346 HV, respectively, which was attributed to the high-volume fraction (60%) of the high-angle grain-boundary and the fine bainite lath. This paper is part of a thematic issue on Nuclear Materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang, People's Republic of China

Funding

National Natural Science Foundation of China · Research Fund for the Doctoral Program of Higher Education of China

References (38)

Show source-provided references
1. 10.1016/j.msea.2005.05.03410.1016/j.msea.2005.05.034 ↗
2. 10.1007/BF0265656110.1007/BF02656561 ↗
3. 10.1016/0001-6160(85)90195-610.1016/0001-6160(85)90195-6 ↗
4. Baker RG · J Iron Steel Inst · 1959 · 192 · 257
5. 10.1016/S1006-706X(10)60103-310.1016/S1006-706X(10)60103-3 ↗
6. 10.1007/BF0266126810.1007/BF02661268 ↗
7. 10.1007/BF0266063210.1007/BF02660632 ↗
8. 10.1007/BF0266063310.1007/BF02660633 ↗
9. 10.1007/BF0264441910.1007/BF02644419 ↗
10. 10.1016/j.msea.2012.08.04910.1016/j.msea.2012.08.049 ↗
11. 10.1016/j.jallcom.2016.11.32710.1016/j.jallcom.2016.11.327 ↗
12. 10.1007/s11661-015-2916-210.1007/s11661-015-2916-2 ↗
13. 10.1002/srin.20150042410.1002/srin.201500424 ↗
14. Wang CY · Mater Sci Eng A · 2008 · 438 · 1135
15. 10.1007/s11661-004-1007-610.1007/s11661-004-1007-6 ↗
16. 10.2355/isijinternational.37.53710.2355/isijinternational.37.537 ↗
17. 10.1016/j.matdes.2008.09.02310.1016/j.matdes.2008.09.023 ↗
18. Rykalin NN. · 1960
19. Annual Book of ASTM Standards, ASTM Designation, E8 and E23, vol. 03, Philadelphia, PA; 1995. p. 142.
20. 10.1016/0921-5093(89)90399-710.1016/0921-5093(89)90399-7 ↗
21. 10.1016/j.actamat.2005.11.00110.1016/j.actamat.2005.11.001 ↗
22. 10.1016/j.actamat.2006.07.00910.1016/j.actamat.2006.07.009 ↗
23. 10.1179/02670830010150736110.1179/026708300101507361 ↗
24. 10.1016/j.matdes.2013.07.03610.1016/j.matdes.2013.07.036 ↗
25. 10.1007/s10853-013-7251-710.1007/s10853-013-7251-7 ↗
26. 10.1016/j.msea.2007.06.00310.1016/j.msea.2007.06.003 ↗
27. 10.1016/j.jallcom.2016.11.32710.1016/j.jallcom.2016.11.327 ↗
28. 10.2355/isijinternational.46.32510.2355/isijinternational.46.325 ↗
29. 10.1016/S1359-6454(99)00200-110.1016/S1359-6454(99)00200-1 ↗
30. 10.1016/j.matchar.2006.06.01410.1016/j.matchar.2006.06.014 ↗
31. ASTM E23-12c. Standard test methods for notched bar impact testing of metallic materials 1. West Conshohocken, PA; 2012.
32. 10.1016/j.msea.2012.12.02410.1016/j.msea.2012.12.024 ↗
33. Gao JM. · 2004
34. 10.1016/j.msea.2014.09.02110.1016/j.msea.2014.09.021 ↗
35. 10.1016/B978-0-408-11034-1.50006-410.1016/B978-0-408-11034-1.50006-4 ↗
36. Belianov I · J Nucl Mater · 1998 · 1259 · 258
37. Klueh RL · J Nucl Mater · 1992 · 896 · 191
38. Li Y · J Nucl Mater · 2007 · 117 · 367