article·2011-01-01

Mechanism of AC arc-ultrasonic on joint of SiC_p/6061Al MMCs

Yucheng Lei

Abstract

To improve the welding performance of SiCp/6061Al,arc-ultrasonic technology was applied in welding process,and the filling material was Al-15Ti-3Si.The mechanism of arc-ultrasonic on microstructures of joint of SiCp/6061Al MMCs in plasma arc In-situ welding with different arc-ultrasonic frequency was investigated.The result shows that the Al3Ti phase is obviously refined by ultrasound.With the frequency 30,50 and 60 kHz,the Al3Ti is crushed to granular or block,and uniformly distributed in the weld.With the frequency 20,40,70 kHz,the Al3Ti is partially crushed,and distributed at the original location along the vertical in the weld.Analysis shows that the arc-ultrasonic impacts the morphology and distribution of Al3Ti mainly by cavitation and acoustic streaming.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.