Adiabatic shearing behaviour of unweldable Al–Sc alloy under extremely high shear loading
Source abstract
Abstract
The present study applies a compressive type split Hopkinson pressure bar to investigate the adiabatic shear behaviour of unweldable Al–Sc alloy under high strain rates ranging from 3·0 × 105 to 6·3 × 105 s–1. The effects of the strain rate on the shear stress, adiabatic shear band characteristics, and fracture features of the unweldable Al–Sc alloy are systematically examined. The results show that both the shear stress and the strain rate sensitivity increase with increasing the strain rate. In addition, it is shown that an adiabatic shear band is formed within the deformed specimens for all values of the strain rate. As the strain rate is increased, the width of the shear band decreases, but the microhardness increases. Moreover, the distortion angle and the magnitude of the local shear strain near the shear band both increase with increasing the strain rate. At a strain rate of 3·0 × 105 s–1, the fracture surface is characterised by multiple transgranular clearage fractures. However, for strain rates greater than 4·5 × 105 s–1, the fracture surface has a transgranular dimple-like characteristic, and thus it is inferred that the ductility of the unweldable Al–Sc alloy improves with increasing the strain rate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Energetic Materials and Combustion · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical EngineeringNational Cheng Kung University, Tainan 701, Taiwan;, Email: wslee@mail.ncku.edu.tw
Center for Micro/Nano Science and TechnologyNational Cheng Kung University, Tainan 701, Taiwan
Department of Mechanical EngineeringNational Cheng Kung University, Tainan 701, Taiwan
References (27)
Show source-provided references
1. Lathabai S., and Lloyd P. G.: Acta Mater. 2002, 50, 4275–4292.10.1016/S1359-6454(02)00259-8 ↗
2. Novotny G. M., and Ardell A. J.: Mater. Set Eng. A, 2001, A318,144–154.10.1016/S0921-5093(01)01326-0 ↗
3. Seidman D. N., Marguis E. A., and Dunand D. C.: Acta Mater. 2002, 50, 4021–4035.10.1016/S1359-6454(02)00201-X ↗
4. 10.1016/j.matlet.2006.03.01710.1016/j.matlet.2006.03.017 ↗
5. Karnesky R. A. · Ser. Mater · 2006 · 55 · 437
6. Kim J. H., Kim J. H., Yeom J. T., Lee D. G., Lim S. G., and Park N. K.: J. Mater. Process. Technol., 2007, 187-188,635–639.10.1016/j.jmatprotec.2006.11.047 ↗
7. Irving B.: Weld. 1, 1997, 76,31–41.10.1016/S0034-3617(00)87459-7 ↗
8. Venkateswarlu K., Pathak L. C., Ray A. K., Das G., Verma P. K., Kuwar M., and Ghosh R. N.: Mater. Set Eng. A, 2004, A383,374–380.10.1016/j.msea.2004.05.075 ↗
9. 10.1007/s11041-005-0081-810.1007/s11041-005-0081-8 ↗
10. Mukhopadhyay A. K., Prasad K. S., Kumar V., Reddy G. M., Kamat S. V., and Varma V. K.: Mater. Sei. Forum, 2006, 519-521,315–320.10.4028/www.scientific.net/MSF.519-521.315 ↗
11. 10.1007/s11837-003-0224-610.1007/s11837-003-0224-6 ↗
12. de Silva M. G., and Ramesh K. T.: Mater. Set Eng. A, 1997, A232,11–22.10.1016/S0921-5093(97)00076-2 ↗
13. 10.1016/S0022-5096(98)00044-110.1016/S0022-5096(98)00044-1 ↗
14. Odeshi A. G., Al-Ameeri S., and Bassim M. N.: J. Mater. Process. Technol, 2005, 162-163,385–391.10.1016/j.jmatprotec.2005.02.157 ↗
15. Meyers M. A., Xu Y. B., Xue Q., Perey-Prado M. T., and McNelly T. R.: Acta Mater. 2003, 51, 1307–1325.10.1016/S1359-6454(02)00526-8 ↗
16. Forbord B., Hallem H., Ryum N., and Marthinsen K.: Mater. Set Eng. A, 2004, A387-389,936–939.10.1016/j.msea.2003.10.374 ↗
17. Jones M. J., and Humphreys F. J.: Acta Mater. 2003, 51, 2149–2159.10.1016/S1359-6454(03)00002-8 ↗
18. 10.1023/B:JMSC.0000021465.99764.b510.1023/B:JMSC.0000021465.99764.b5 ↗
19. Marguis E. A., Seidman D. N., and Dunand D. C.: Acta Mater. 2003, 51, 4751–4760.10.1016/S1359-6454(03)00288-X ↗
20. Desmukh M. N. · Ser. Mater · 2005 · 52 · 645
21. Lee W. S. · Ser. Mater · 2006 · 54 · 1463
22. 10.1016/j.matchemphys.2008.08.01610.1016/j.matchemphys.2008.08.016 ↗
23. 10.2320/matertrans.48.50010.2320/matertrans.48.500 ↗
24. 10.1179/174328408X32307810.1179/174328408X323078 ↗
25. 10.1016/j.jnucmat.2007.09.00210.1016/j.jnucmat.2007.09.002 ↗
26. Egg S. S., Sun Y. Q., and Hirsch P. B.: Mater. Set Eng. A, 1995, A192-193,45–52.10.1016/0921-5093(94)03202-5 ↗
27. Xu Y. B., Zhong W. L., Chen Y. J., Shen L. T., Liu Q., Bai Y. L., and Meyers M. A.: Mater. Set Eng. A, 2001, A299,287–295.10.1016/S0921-5093(00)01412-X ↗