journal article·2014-05

Microscale analysis of influence of wettability on flow behaviours of molten Cu infiltrating into W channel

Y. X. Bai, S. H. Liang

Materials Science and Technology· Volume 30· Issue 6
Publisher page

Abstract

In order to better understand the effect of the wettability between Cu and W on the infiltration process during the fabrication of CuW alloy, the flow patterns of molten Cu in the W microchannel at four different contact angles between Cu and W were simulated by finite volume method based on the modified Navier–Stokes equation, and the effect of Co content in molten Cu on the flow front was studied as well. The results show that the less contact angle between Cu and W increases the differential and negative pressures generated at the flow front and thus increases the flow velocity and decreases the infiltration time during the fabrication process of CuW alloy. However, the less contact angle is easier to cause a larger negative pressure with the progress of the infiltration process, which is not favourable for the filling of molten Cu in the W channel. In addition, Co addition can accelerate the flow of molten Cu in the W channel due to the increased differential pressure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Lattice Boltzmann Simulation Studies · Fluid Dynamics and Thin Films · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China

School of Chemistry and Chemical Engineering, Yulin University, Yulin 719000, China

References (22)

Show source-provided references
1. 10.1016/j.matlet.2005.12.11310.1016/j.matlet.2005.12.113 ↗
2. 10.1016/S1001-0521(06)60011-910.1016/S1001-0521(06)60011-9 ↗
3. 10.1016/j.jmatprotec.2004.07.15410.1016/j.jmatprotec.2004.07.154 ↗
4. 10.1016/j.scriptamat.2004.06.00410.1016/j.scriptamat.2004.06.004 ↗
5. 10.1016/j.ijrmhm.2008.12.00810.1016/j.ijrmhm.2008.12.008 ↗
6. 10.1016/j.ijrmhm.2012.01.00610.1016/j.ijrmhm.2012.01.006 ↗
7. 10.1016/j.msea.2011.01.10110.1016/j.msea.2011.01.101 ↗
8. 10.1007/BF0266852310.1007/BF02668523 ↗
9. Sheng Z. Y. · Powder Metall. Technol. · 2007 · 6 · 403
10. 10.1179/1743284712Y.000000007510.1179/1743284712Y.0000000075 ↗
11. 10.1179/1743284711Y.000000005910.1179/1743284711Y.0000000059 ↗
12. 10.1179/174328407X24853210.1179/174328407X248532 ↗
13. 10.1016/j.jcp.2008.02.02310.1016/j.jcp.2008.02.023 ↗
14. 10.1016/j.commatsci.2006.01.02010.1016/j.commatsci.2006.01.020 ↗
15. 10.1016/j.memsci.2010.10.04210.1016/j.memsci.2010.10.042 ↗
16. Pfahler J. · Sens. Actuators A · 1989 · 22 · 43110.1016/0924-4247(89)80008-1 ↗
17. Davis J. R. ’ASM Specialty Handbook‚, ’Copper and Copper Alloys‚, 446–452; 2001, Materials Park, OH, ASM International.
18. 10.1016/j.jcp.2007.01.01010.1016/j.jcp.2007.01.010 ↗
19. 10.1016/j.jcp.2011.08.01110.1016/j.jcp.2011.08.011 ↗
20. 10.1016/S0252-9602(10)60184-110.1016/S0252-9602(10)60184-1 ↗
21. 10.1016/j.snb.2006.09.04010.1016/j.snb.2006.09.040 ↗
22. Sun D. G. · Rare Met. Mater. Eng. · 2008 · 37 · 2134