journal article·1998-04-01

Microstructure of friction weld interface of 1050 aluminium to austenitic stainless steel

S. Fukumoto, H. Tsubakino, K. Okita, M. Aritoshi, T. Tomita

Materials Science and Technology· Volume 14· Issue 4
Publisher page

Abstract

Type 1050 aluminium was bonded to type 304 stainless steel by a friction welding procedure. The aluminium was greatly deformed, and the grains were elongated and refined near the weld interface. The stainless steel was slightly deformed and partly transformed at the faying surface from austenite to martensite owing to hard friction. As a result, the hardness of both materials in the vicinity of the weld interface was higher than that of the base metals. Constituent elements of both materials had interdiffused through the weld interface, and some intermetal1ic compounds, Fe2Al5, FeAl, and Fe3Al, were formed at the weld interface. It was presumed by estimating with metallographic observation that the welding temperature was lower than the lowest eutectic temperature in the metal system. So the friction welding mechanism of this system was based on interdiffusion of each constituent in the solid state.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (1)

Show source-provided references
1. 10.1179/02670830122500063510.1179/026708301225000635 ↗