journal article·2022-01

Effect of hot deformation parameters on dynamic recrystallisation mechanisms of super austenitic stainless steel

Lin Wang, Chen Chen, Zhuyu Wang, Zhuoyuan Li, Bo Lv, Fucheng Zhang

Materials Science and Technology· Volume 38· Issue 2
Publisher page

Abstract

Hot compression tests on super austenitic stainless steel (SASS) are performed in the temperature range of 900–1200 °C and strain rates of 0.01–10 s −1 . The results reveal that, at lower deformation temperatures of 900 and 1000 °C or lower strain rates of 0.01 s −1 , 0.1 s −1 and 1 s −1 , the dominant DRX mechanism of SASS can be summarised as: a large number of high-angle grain boundaries (HAGBs) are gradually developed from low-angle grain boundaries (LAGBs) and DRX grains are partially formed on HAGBs. However, the formation of DRX grains due to sub-grain rotation is the main DRX mechanism at higher temperatures of 1100 °C and 1200 °C and at the higher strain rate of 10 s −1 .
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, People's Republic of China

National Engineering Research Center for Equipment and Technology of Cold Rolled Strip, Yanshan University, Qinhuangdao, People's Republic of China

Hebei Key Laboratory for Optimizing Metal Product Technology and Performance, Yanshan University, Qinhuangdao, People's Republic of China

School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, People's Republic of China

Funding

National Natural Science Foundation of Chin · the Key Research & Development Program of Hebei Province

References (24)

Show source-provided references
1. 10.1016/j.msea.2006.03.00310.1016/j.msea.2006.03.003 ↗
2. Beddoes J · 1999
3. 10.1016/j.matchar.2018.01.04010.1016/j.matchar.2018.01.040 ↗
4. 10.1016/j.jallcom.2016.06.02310.1016/j.jallcom.2016.06.023 ↗
5. 10.1016/S0011-9164(03)00430-210.1016/S0011-9164(03)00430-2 ↗
6. 10.1016/j.jnucmat.2007.08.01510.1016/j.jnucmat.2007.08.015 ↗
7. 10.1016/j.matdes.2014.12.04910.1016/j.matdes.2014.12.049 ↗
8. 10.1007/s42243-018-0203-310.1007/s42243-018-0203-3 ↗
9. 10.1016/j.matdes.2013.10.04210.1016/j.matdes.2013.10.042 ↗
10. 10.1016/j.msea.2019.13804410.1016/j.msea.2019.138044 ↗
11. 10.1016/j.msea.2020.14065010.1016/j.msea.2020.140650 ↗
12. 10.1016/j.jallcom.2021.15860110.1016/j.jallcom.2021.158601 ↗
13. 10.1016/j.mser.2009.03.00110.1016/j.mser.2009.03.001 ↗
14. 10.1080/03019233.2015.112000310.1080/03019233.2015.1120003 ↗
15. 10.1016/j.msea.2017.11.05910.1016/j.msea.2017.11.059 ↗
16. 10.1016/j.msea.2012.03.09910.1016/j.msea.2012.03.099 ↗
17. 10.1016/j.jallcom.2019.01.33410.1016/j.jallcom.2019.01.334 ↗
18. 10.1016/j.jallcom.2019.15332510.1016/j.jallcom.2019.153325 ↗
19. 10.1016/j.jmst.2019.08.05810.1016/j.jmst.2019.08.058 ↗
20. 10.1016/j.msea.2018.07.10410.1016/j.msea.2018.07.104 ↗
21. 10.1016/j.jallcom.2015.04.00810.1016/j.jallcom.2015.04.008 ↗
22. 10.1016/j.jmrt.2021.05.00610.1016/j.jmrt.2021.05.006 ↗
23. Sun Y · J Alloys Compd: An Interdisciplinary Journal of Materials Science and Solid-State Chemistry and Physics · 2018 · 753 · 25610.1016/j.jallcom.2018.04.225 ↗
24. 10.1016/j.matdes.2010.11.04810.1016/j.matdes.2010.11.048 ↗