journal article·2021-05

Effect of Al content on microstructures and properties of Fe 1.25 CoCrNi 1.25 Al x high-entropy alloys

Chunyan Li, Yu Lu, Xinling Li, Zhenxiang Zhao, Sheng-Zhong Kou

Materials Science and Technology· Volume 37· Issue 8
Publisher page

Abstract

The effect of Al content on microstructures and properties of Fe 1.25 CoCrNi 1.25 Al x ( x = 0.1, 0.25, 0.4) high-entropy alloys was studied. The alloys arecomposed of a single-phase face-centered cubic solid solutionand do not change with the change of Al content. The tensile yield strength of as-cast alloys is below 200 MPa, and the elongation is above 55%. After cold-rolling and annealing, the strength and hardness increase with the increase of Al content. The comprehensive mechanical properties of the alloy with x = 0.25 reach the best. The texture composition of Fe 1.25 CoCrNi 1.25 Al 0.4 gradually changes from {100} <001> to {110} <101> after cold-rolling and annealing. Trace Al is beneficial to improve the corrosion resistance of the alloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou, People's Republic of China

School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou, People's Republic of China

Funding

National Natural Science Foundation of China · Lanzhou University of Technology

References (26)

Show source-provided references
1. 10.1016/j.cub.2004.05.05510.1016/j.cub.2004.05.055 ↗
2. 10.11900/0412.1961.2014.0040610.11900/0412.1961.2014.00406 ↗
3. Wang GD · Angang Technol · 2005 · 04 · 5
4. Zhao YQ. · Mater China · 2010 · 5 · 001
5. Zhu CC · Hot Work Technol · 2013 · 042 · 15
6. 10.7502/j.issn.1674-3962.2014.12.0510.7502/j.issn.1674-3962.2014.12.05 ↗
7. Wu BW. · Metall Mater · 2019 · 39 · 172
8. 10.1007/s40843-017-9195-810.1007/s40843-017-9195-8 ↗
9. 10.1002/adem.20030056710.1002/adem.200300567 ↗
10. Li G · J Yanshan Univ · 2018 · 42 · 4
11. 10.1007/s40843-017-9195-810.1007/s40843-017-9195-8 ↗
12. 10.3390/met702004310.3390/met7020043 ↗
13. 10.13251/j.issn.0254-6051.2019.06.02310.13251/j.issn.0254-6051.2019.06.023 ↗
14. 10.1016/j.jallcom.2010.10.21010.1016/j.jallcom.2010.10.210 ↗
15. 10.1016/j.corsci.2018.01.03010.1016/j.corsci.2018.01.030 ↗
16. 10.1109/TNANO.2010.208963810.1109/TNANO.2010.2089638 ↗
17. 10.14158/j.cnki.1001-3814.2017.08.01410.14158/j.cnki.1001-3814.2017.08.014 ↗
18. Niu XL · J Funct Mater · 2013 · 44 · 532
19. 10.1016/j.vacuum.2020.10987510.1016/j.vacuum.2020.109875 ↗
20. 10.1016/j.apt.2020.02.03210.1016/j.apt.2020.02.032 ↗
21. 10.1016/j.jallcom.2020.15601410.1016/j.jallcom.2020.156014 ↗
22. Yang P. Electron backscatter diffraction technology and its application. Beijing: Metallurgical Industry Press, 2007. http://gongyejishu.guangyutushu.cn/pdfdetail/SOTc4-NzUwMjQ0MzIwNw==.pdf.
23. Cui ZQ, Wang KL, Wu R. Metallurgy and heat treatment. Beijing: Peking University Press; 2010;10. http://www.bookask.com/book/106427.html.
24. Bo XT. Factors affecting recrystallization temperature and grain size. Heat Treat. 2019; 34(05):31, http://www.cnki.com.cn/Article/CJFDTotal-RACL201905007.htm.
25. Wu LS. · Phys Chem Insp (PhysVol) · 1995 · 031 · 57
26. 10.1142/S021797921744010610.1142/S0217979217440106 ↗