journal article·2016-09Open access

Time transient validation of residual stress prediction models for aluminium alloy quenching

D. A. Tanner, J. S. Robinson

Materials Science and Technology· Volume 32· Issue 14

Abstract

Finite element models that predict residual stress states in relatively large quenched aluminium alloy products tend to give reliable results. However, even though there is confidence that the predicted stress state is correct, there is no validation indicating that the stress/displacement development during the quench is comparable to the experimental case. Combined with this, finite element predictions for small samples tend to underestimate surface stress. This paper uses a ‘Navy C-Ring’ benchmark design to monitor displacement during quenching. The heat transfer coefficient is found to be the most dominant boundary condition and is critical to ensuring displacement and residual stress predictions that match the experimental case. This paper is part of a Themed Issue on Measurement, modelling and mitigation of residual stress.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Design and Manufacturing Technology, University of Limerick, Limerick, Ireland

Materials and Surface Science Institute, University of Limerick, Limerick, Ireland

Department of Mechanical, Aeronautical and Biomedical Engineering, University of Limerick, Limerick, Ireland

References (18)

Show source-provided references
1. Chobaut N., Repper J., Pirling T., Carron D., and Drezet J.M. ‘Residual stress analysis in AA7449 as-quenched thick plates using neutrons and FE modelling’, 13th International Conference on Aluminium Alloys (ICAA13), 2012, TMS, 285–291.10.1002/9781118495292.ch44 ↗
2. 10.1016/j.jmatprotec.2009.05.01510.1016/j.jmatprotec.2009.05.015 ↗
3. 10.1002/nme.190510.1002/nme.1905 ↗
4. 10.1007/BF0232755110.1007/BF02327551 ↗
5. Becker R. · 1994 · 287
6. Totten G. E. · 2002
7. Hardin R., and Beckermann C. ‘Simulation of heat treatment distortion’, 59th SFSA Technical and Operating Conference, Chicago, IL, 2005.
8. Hibbitt D. · 2013
9. S. S. Ltd, JMatPro. 2014.
10. 10.1179/mst.1997.13.3.20310.1179/mst.1997.13.3.203 ↗
11. Tanner: D. A. ‘Measurement and finite element prediction of residual stresses in aluminium alloy 7010 forgings’, PhD thesis, University of Limerick, Limerick, 1999. https://ulir.ul.ie/handle/10344/3785.
12. Fitzpatrick M. E., Fry A. T., Holdway P., Kandil F. A., Shackleton J., and Suominen L. ‘Determination of residual stresses by X-ray diffraction’, Measurement good practice guide, No. 52 2005.
13. Noyan I. C. · 1987
14. 10.1007/978-1-4613-2775-2_1310.1007/978-1-4613-2775-2_13 ↗
15. Cullity B. D. · 2001
16. Sasaki T. · ‘Next generation X-ray stress measurement by two-dimensional detector (cos alpha method)’, J. Jpn Soc. Tribologis. · 2012 · 57 · 467
17. Sasaki T., Miyazawa Y., Takahashi S.I., Matsuyama R., Sasaki K., and Hiratsuka K. ‘Application of synchrotron radiation to residual stress analysis by IP/cos alpha method’, Stress evaluation in materials using neutrons and synchrotron radiation, 2008, 249–254.10.4028/www.scientific.net/MSF.571-572.249 ↗
18. Passarella D. N., Varas F., and Martín E. ‘Development of a heat transfer model for quenching by submerging’, Mecánica Computacional, Buenos Aires, Argentina, 2010, Asociación Argentina de Mecánica Computacional, 5773–5783.