article·2012-01-01

Study on microstructure and properties of welded joints of a 690 MPa grade HSLA steel

Peng Zeng-hua

Abstract

To reveal the relationship between microstructures and mechanical properties of a 690 MPa grade high strength low alloyed(HSLA) steel,the welded joints without developing any defects were obtained by SMAW and SAW,and the mechanical properties(tensile strength,toughness,flexural strength) were measured,the microstructures were studied by OP,SEM and TEM.The results indicated that both microstructures of the welds from two welding processes mainly consisted of lath bainite and a little acicular ferrite,and the coarse grain heat affected zones(CGHAZ) revealed a predominately coarse bainite structure and a little martensite.Numerous spherical inclusions,small and uniformly distributed,were founded in both weld metals.The welded joints of the two welding processes had fine mechanical properties.At-50 ℃ both the fracture surfaces exhibited a mixed fractograph of dimples and quasi-cleavage.Impact energy of SMAW at weld interface was lower than that of SAW,but it increased more significantly with the increase of distance from weld interface.Microstructures and inclusions play an important role in welded joints.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.