Effect of temper embrittlement and specimen size on Charpy impact testing of a Cr–Mo–V rotor steel
Source abstract
Abstract
Full and subsize Charpy V notch specimens from several locations of a high pressure–intermediate pressure Cr–Mo–V turbine rotor were tested. A comparison between full and subsize impact energy data showed that the smaller specimens exhibited qualitatively similar behaviour, with a systematic reduction in fracture appearance transition temperatures (FATTs). The full and subsize impact energy data were normalised against the specimen area and volume. The latter normalisation produced the closest match and the offset between the two data sets was described by a simple linear equation. The sensitivity of impact energy and FATT to specimen size was examined in samples possessing different degrees of temper embrittlement. It was found that the difference in FATT between full and subsize specimens for embrittled samples was at least double that of deembrittled samples. It is proposed that the observed specimen size/impact energy/FATT variations with degree of embrittlement arise from sensitivity of intergranular fracture to lineal specimen thickness, since fracture occurs predominantly through a twodimensional network of grain boundaries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Standard ASTM E23–96, 'Annual book of ASTM standards', Vol. 03. 01, 136; 1996, Philadelphia, PA, ASTM.
2. 10.1016/0022-3115(87)90007-910.1016/0022-3115(87)90007-9 ↗
3. D. J. ALEXANDER and R. L. KLUEH: in `Charpy impact tests: factors and variables', STP 1072, 179–191; 1991, Philadelphia, PA, ASTM.10.1520/STP24145S ↗
4. 'Metals handbook' , 8th edn, Vol. 9, Tractography'; 1974, Metals Park, OH, American Society for Materials.
5. G. E. LUCAS, G. R. ODETTE, J. W. SHECKERD, P. MCCONELL, and J. PERRIN: in 'The use of small-scale specimens for testing of irradiated material', (ed. W. R. Corwin and G. E. Lucas), STP 888, 305–324; 1986, Philadelphia, PA, ASTM.10.1520/STP33012S ↗
6. LOUDEN B. S. · J. Nucl. Mater · 1988 · 155
7. W. R. CORWIN and A. M. HOUGLAND: in 'The use of small-scale specimens for testing of irradiated material', (ed. W. R. Corwin and G. E. Lucas), STP 888, 325–338. 1986, Philadelphia, PA, ASTM.10.1520/STP888-EB ↗
8. R. VISWANATHAN: 'Damage mechanisms and life assessment of high-temperature components'; 1989, Materials Park, OH, ASM International.10.31399/asm.tb.dmlahtc.9781627083409 ↗
9. 10.1520/JTE12500J10.1520/JTE12500J ↗