Interfacial reactions of sequentially electroplated Au/Sn/Au films on Si chips
Source abstract
Abstract
Au−30 at-Sn eutectic alloy was fabricated by sequentially pulse electroplating Au and Sn films on Si chips. Three kinds of Au/Sn/Au triple layer films were prepared in the present work: Au/Sn/Au (6/6/1 μm) films, Au/Sn/Au (6/6/6 μm) films and Au/Sn/Au (8/6/1 μm) films. The microstructure and phase transformation in Au/Sn/Au films during aging and reflow soldering were investigated. For Au/Sn/Au (6/6/1 μm) films during aging at 100 and 150°C, the layered AuSn/AuSn2/AuSn4 structure formed in the reaction region. Furthermore, the Sn film was completely consumed, and AuSn4 finally transformed into AuSn and AuSn2 after aging at 150°C for 15 h. For Au/Sn/Au (6/6/6 μm) films during aging at 150°C, the electroplating sequence had an important effect on the formation of Au−Sn phases. An Au5Sn layer was present at the Au II/Sn interface but not at the Au I/Sn interface. For Au/Sn/Au (8/6/1 μm) films, the micropores that formed preferentially along the Au5Sn/AuSn interface remarkably decreased with increasing reflow temperature from 280 to 310°C. After reflowing for 10 s, the microstructure was not an Au−Sn eutectic; however, after reflowing for 60 s, coarsened primary Au5Sn phase and typical Au−30 at-Sn eutectic microstructure of fine eutectic phases (AuSn+Au5Sn) formed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Electronic Packaging Materials Laboratory School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
References (19)
Show source-provided references
1. 10.1023/A:100480551253510.1023/A:1004805512535 ↗
2. 10.1109/33.8732210.1109/33.87322 ↗
3. 10.1016/j.matdes.2010.05.03510.1016/j.matdes.2010.05.035 ↗
4. 10.1016/j.msea.2007.03.05010.1016/j.msea.2007.03.050 ↗
5. Zhou T · J. Electron. Packag. · 2005 · 5 · 5
6. 10.1007/BF0265742510.1007/BF02657425 ↗
7. 10.1016/0254-0584(94)90169-410.1016/0254-0584(94)90169-4 ↗
8. Liu Y, Huang ML: Proc. Int. Conf. on ‘Electronic packaging technology and high density packaging’, Beijing, China, August 2009, Tsinghua University, Paper 802–805.
9. 10.1023/A:102507921548010.1023/A:1025079215480 ↗
10. 10.1016/j.surfcoat.2009.10.01010.1016/j.surfcoat.2009.10.010 ↗
11. 10.1007/s11664-001-0157-110.1007/s11664-001-0157-1 ↗
12. Paul A · Z. Metallkd. · 2004 · 95 · 913
13. 10.1016/j.mser.2005.03.00110.1016/j.mser.2005.03.001 ↗
14. 10.1016/j.actamat.2008.08.00210.1016/j.actamat.2008.08.002 ↗
15. 10.1007/s11664-008-0401-z10.1007/s11664-008-0401-z ↗
16. 10.1023/B:JMSC.0000019993.32079.c210.1023/B:JMSC.0000019993.32079.c2 ↗
17. 10.1007/s10854-010-0113-z10.1007/s10854-010-0113-z ↗
18. 10.1007/s11664-001-0140-x10.1007/s11664-001-0140-x ↗
19. 10.1016/0040-6090(81)90468-510.1016/0040-6090(81)90468-5 ↗