journal article·2001-11

Effects of aging on impact behaviour of different stainless steel weldments

G. Straffelini, A. Molinari, F. Bonollo, A. Tiziani

Materials Science and Technology· Volume 17· Issue 11
Publisher page

Abstract

Instrumented impact testing was used to investigate the effects of aging on the impact deformation and fracture of different weldments of an AISI type 316L stainless steel plate and a superduplex stainless steel plate. Aging at 800C of metal inert gas MIG and laser beam LB weldments of the 316L stainless steel plate produced a precipitation of sigma phase, which was more intense in the MIG weldments. Correspondingly, the MIG weldments showed a noticeable decrease in impact energy and in impact yield and maximum loads as the aging time was increased. The LB weldments, on the other hand, showed an initial decrease in absorbed energy followed by a noticeable increase, because of the appearance of delaminations during the fracture event. Aging at 900C of the parent metal and of LB and plasma arc PA weldments of the superduplex stainless steel plate produced a precipitation of sigma phase which was much more intense in the parent metal. Both the parent metal and the weldments showed a noticeable decrease in impact energy and in impact yield and maximum loads as the aging time was increased. These weldments were found to be more sensitive to the precipitation of sigma phase than the austenitic stainless steel weldments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. P. MARSHALL: `Austenitic stainless steel'; 1984, London, Elsevier Applied Science.
2. E. FOLKHARD: 'Welding metallurgy of stainless steel'; 1984, Vienna, Springer-Verlag.
3. 10.1179/mst.1992.8.8.68510.1179/mst.1992.8.8.685 ↗
4. J. CHARLES: Proc. Conf. 'Duplex stainless steel '91', 3; 1991, Les Ulis, France, Les Editions de Physique.
5. 10.1179/mst.1991.7.9.85310.1179/mst.1991.7.9.853 ↗
6. 10.1520/JTE10915J10.1520/JTE10915J ↗
7. 10.1016/0013-7944(84)90068-710.1016/0013-7944(84)90068-7 ↗
8. O. GRONG: 'Metallurgical modelling of welding'; 1997, London, The Institute of Materials.
9. B. E. S LINDBLOM and N. HANNERZ: Proc. Conf. 'Duplex stainless steel '91', Vol. 3; 1991, Les Ulis, France, Les Editions de Physique.
10. 10.1016/S1359-6454(00)00069-010.1016/S1359-6454(00)00069-0 ↗
11. T. J. KOPPENAAL: in 'Instrumented impact testing', STP 563, 92–101; 1974, Philadelphia, PA, ASTM.10.1520/STP32187S ↗
12. COOK J. · Proc · 1964 · 282, 509— 521
13. R. W. HERTZBERG: 'Deformation and fracture mechanics of engineering materials'; 1989, New York, Wiley.