journal article·2012-03

Simulation of precipitation of secondary carbides in hot work tool steels

K Frisk

Materials Science and Technology· Volume 28· Issue 3
Publisher page

Abstract

Precipitation of secondary carbides in hot work tool steels during tempering heat treatments has been investigated using simulations based on a thermodynamic description coupled with kinetic parameters through multicomponent nucleation and growth models. The simulations reproduce the measured effects of steel composition on the precipitation of secondary carbides. Both Si and V increase the volume fraction of fine secondary carbides precipitated during tempering provided that the austenitising temperature is adjusted to give the same fraction of retained primary carbides. The most important effect of Si in 5Cr steels is its influence on the primary carbide stability at austenitisation temperatures, but increasing the V contents has a strong effect on the fraction of secondary carbides, without increasing the size, and can thus improve the yield strength. The most critical input to the calculations is the thermodynamic description of the individual phases.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Swerea KIMAB, Box 55970, Stockholm SE-102 16, Sweden

References (6)

Show source-provided references
1. 10.7449/2008/Superalloys_2008_923_93210.7449/2008/Superalloys_2008_923_932 ↗
2. 10.7449/2004/Superalloys_2004_877_88610.7449/2004/Superalloys_2004_877_886 ↗
3. Kaufman L, Bernstein H: ‘Computer calculations of phase diagrams’; 1970, New York, Academic Press.
4. 10.1002/srin.20090006910.1002/srin.200900069 ↗
5. 10.1016/j.msea.2004.11.05010.1016/j.msea.2004.11.050 ↗
6. 10.1016/j.actamat.2007.05.00410.1016/j.actamat.2007.05.004 ↗