Improved properties of Mn series ultralow carbon steel with ultrafine bainitic structure
Source abstract
Abstract
In order to reduce the cost of alloying elements, Mn series ultralow carbon bainitic (ULCB) steels have been developed. The different cooling conditions have been used to improve the mechanical properties of Mn series ULCB steels in the present study. The hot rolled ULCB steel plates with 26 mm thickness were water quenched to different finishing quenching temperatures (550, 450 and 350°C) followed by air cooling. Results show that the as rolled ULCB steel plates exhibit high yield strength of 775 MPa and low energy transition temperature of −55°C when the finishing quenching temperature is chosen at 450°C. Low temperature impact toughness was improved through control of the finishing quenching temperature. Microstructure observations show that a fine granular bainite structure is obtained, and the granular bainite structure exhibited shorter crack propagation path than both granular ferrite and lath martensite structures, which contributed to the improved combination of strength and toughness. Furthermore, the formation process of fine granular bainite structure was investigated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory for Advanced Materials of Ministry of Education Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
References (28)
Show source-provided references
1. 10.1016/0261-3069(92)90003-Z10.1016/0261-3069(92)90003-Z ↗
2. 10.1007/BF0057005810.1007/BF00570058 ↗
3. 10.1016/S0924-0136(96)02575-710.1016/S0924-0136(96)02575-7 ↗
4. 10.1016/S0254-0584(00)00379-510.1016/S0254-0584(00)00379-5 ↗
5. 10.1007/s11661-010-0590-y10.1007/s11661-010-0590-y ↗
6. Hardy M · J. Iron. Steel Res. Int. · 2011 · 18 · 785
7. 10.1016/S1006-706X(11)60070-810.1016/S1006-706X(11)60070-8 ↗
8. 10.1016/S1006-706X(10)60086-610.1016/S1006-706X(10)60086-6 ↗
9. Gao GH · Acta Metall. Sin. · 2011 · 47 · 513
10. 10.1016/S1359-6454(99)00200-110.1016/S1359-6454(99)00200-1 ↗
11. 10.1016/S1359-6462(98)00170-510.1016/S1359-6462(98)00170-5 ↗
12. 10.1016/j.matlet.2009.06.03210.1016/j.matlet.2009.06.032 ↗
13. 10.1016/S0921-5093(03)00477-510.1016/S0921-5093(03)00477-5 ↗
14. 10.1179/02670830422501735510.1179/026708304225017355 ↗
15. 10.1016/j.msea.2009.03.05210.1016/j.msea.2009.03.052 ↗
16. 10.1080/1042691090314331610.1080/10426910903143316 ↗
17. Fang HS · Acta Metall. Sin. · 1986 · 22 · A283
18. 10.1007/BF0264641610.1007/BF02646416 ↗
19. 10.1016/j.cossms.2006.06.00510.1016/j.cossms.2006.06.005 ↗
20. 10.1016/j.msea.2006.06.03210.1016/j.msea.2006.06.032 ↗
21. 10.1016/j.msea.2010.06.06110.1016/j.msea.2010.06.061 ↗
22. 10.1007/s11661-002-0059-810.1007/s11661-002-0059-8 ↗
23. 10.1016/S1359-6462(02)00196-310.1016/S1359-6462(02)00196-3 ↗
24. 10.1016/j.actamat.2004.01.02510.1016/j.actamat.2004.01.025 ↗
25. 10.1016/j.scriptamat.2009.02.05310.1016/j.scriptamat.2009.02.053 ↗
26. 10.1016/S1359-6462(00)00392-410.1016/S1359-6462(00)00392-4 ↗
27. 10.1016/j.scriptamat.2007.10.05310.1016/j.scriptamat.2007.10.053 ↗
28. 10.1016/j.msea.2006.12.09710.1016/j.msea.2006.12.097 ↗