journal article·1999-10

Effect of alloying element modification on superplastic deformation properties of Ti–4Mo–4Al–2Sn–0·5Si (IMI550)

M. Tuffs, C. Hammond

Materials Science and Technology· Volume 15· Issue 10
Publisher page

Abstract

The superplastic deformation properties of a commercial titanium alloy, IMI550 (Ti–4Mo–4Al–2Sn–0·5Si, wt-%) are compared with a specially melted ‘modified’ alloy in which 1 wt-%Mo (slow diffusing element) is replaced with 1 wt-%Fe (fast diffusing element) on the basis that the diffusional properties of the β phase, to which these alloying elements segregate, is a significant factor in determining the overall flow properties. It is shown that the superplastic deformation properties of both alloys in the temperature range 800–850°C develop with strain as the initial heterogeneous α + β structure develops into uniform duplex equiaxed microstructures. Thereafter, the modified alloy exhibits enhanced superplastic properties (reduced flow stresses in the strain rate range 5 × 10-5–5 × 10-3 s-1). The results are analysed quantitatively on the basis of the Ashby and Verrall model applied to the α and β phases combined according to the isostress model for two phase deformation which accounts for the interaction of the α and β phases.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. 10.1007/BF0264444510.1007/BF02644445 ↗
2. 10.1007/BF0266889510.1007/BF02668895 ↗
3. C. H. HAMILTON, A. K. GHOSH, and M. M. MAHONEY: in ‘Advanced processing methods for titanium’, 129–144; 1982, Warrendale, PA, TMS—AIME.
4. 10.1007/BF0114551110.1007/BF01145511 ↗
5. 10.1016/0001-6160(73)90057-610.1016/0001-6160(73)90057-6 ↗
6. BALL A. · J. Mater. Sci · 1969 · 3 · 3
7. 10.1016/0025-5416(71)90085-110.1016/0025-5416(71)90085-1 ↗
8. 10.1007/BF0265660710.1007/BF02656607 ↗
9. ARIELI A. · Metall. Trans. A · 1971 · 8 · 159110.1007/BF02644864 ↗
10. GLADMAN T. · J. Iron Steel Inst · 1960 · 194 · 189
11. F. B. PICKERING: ‘The basis of quantitative metallography’, 29; 1975, London, The Institution of Metallurgists.
12. GOOLD D. · J. Inst. Met · 1959 · 88 · 444
13. 10.1016/0001-6160(63)90194-910.1016/0001-6160(63)90194-9 ↗
14. 10.1016/0001-6160(64)90075-610.1016/0001-6160(64)90075-6 ↗
15. 10.1080/1478643630820729210.1080/14786436308207292 ↗
16. I. KAUR and W. GUST: ‘Fundamentals of grain and interphase boundary diffusion’, 301; 1989, Stuttgart, Ziegler Press.
17. 10.1016/0001-6160(78)90153-010.1016/0001-6160(78)90153-0 ↗
18. LEE D. · Trans. AIME · 1967 · 239 · 1034
19. 10.1016/0001-6160(72)90087-910.1016/0001-6160(72)90087-9 ↗
20. MORGAN G. C. · PhD thesis · 1987