Thermomechanical fatigue behaviour and mode of failure of laser welded single crystal Ni based superalloy
Source abstract
Abstract
The baseline metallography of single crystal alloy N5 was compared with laser welded material to evaluate the effect of the welding process on cracking behaviour. In addition, baseline thermomechanical fatigue data were compared with the fatigue properties of welded specimens. The solution treated and aged single crystal alloy was found to contain microporosity, Ta rich MC carbides, Cr–Mo rich grain boundary borides, gamma prime and fine secondary gamma prime. In addition, recrystallised grains were present in the weld heat affected zone and provided a path for crack propagation out of the fusion zone. The laser beam welds showed defects mainly associated with the fusion zone, while thermomechanical fatigue analysis of the laser weld data showed inferior values compared to the baseline solution treated and aged material. Metallographic analysis showed that this was due to increased defects in the fusion zone associated with surface oxidation and heat affected zone recrystallisation compared to the non-welded alloy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Standard Aero Ltd, Winnipeg, Man., Canada
University of Manitoba, Winnipeg, Man., Canada
References (22)
Show source-provided references
1. 10.1016/0921-5093(91)90702-O10.1016/0921-5093(91)90702-O ↗
2. Meyer-Olbersleben F · ASTM Spec. Tech. Publ. · 1966 · 41
3. 10.1016/j.ijfatigue.2007.01.05810.1016/j.ijfatigue.2007.01.058 ↗
4. Chataigner E · ASTM Spec. Tech. Publ. · 1966 · 2 · 3
5. Reed PAS, Miller MD:in ‘Superalloys 2008’(, Reed R C, et al.), 527–533; 2008, London, The Metals Society.10.7449/2008/Superalloys_2008_527_533 ↗
6. 10.1016/j.ijfatigue.2011.07.00910.1016/j.ijfatigue.2011.07.009 ↗
7. 10.1007/s10853-011-5462-310.1007/s10853-011-5462-3 ↗
8. 10.1007/BF0264667910.1007/BF02646679 ↗
9. 10.1016/j.actamat.2009.01.02710.1016/j.actamat.2009.01.027 ↗
10. 10.1016/j.msea.2011.04.08310.1016/j.msea.2011.04.083 ↗
11. 10.1016/j.scriptamat.2009.08.03610.1016/j.scriptamat.2009.08.036 ↗
12. 10.1046/j.1460-2695.2003.00541.x10.1046/j.1460-2695.2003.00541.x ↗
13. Bathias C: in ‘Fatigue of materials and structures: fundamentals 2010’, (, Bathias C, Pineau A); 2000, New York, Wiley.
14. 10.1142/S175882511000076710.1142/S1758825110000767 ↗
15. Young GA, Lewis N, Battige CK, Somers RA, Penik MA, Brewer L, Othon M: Proc. 6th Int. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, April 2002, ASM International, 912–917.
16. 10.1016/j.jmatprotec.2010.07.02710.1016/j.jmatprotec.2010.07.027 ↗
17. 10.1243/03093247V30103510.1243/03093247V301035 ↗
18. Delprete C, Rosso C, Sesana R: Proc. ESDA 2006, Torino, Italy, July 2006, ASME, 105–114.10.1115/ESDA2006-95470 ↗
19. Coffin LE · Trans. ASM · 1954 · 76 · 931
20. Manson SS: ‘Behavior of materials under conditions of thermal stress’, NACA Technical Note 2933, National Advisory Committee for Aeronautics, Washington, DC, USA, 1953.
21. Dieter GE: ‘Mechanical metallurgy’, 3rd edn; 1986, New York, McGraw-Hill.
22. Jena AK, Chaturvedi MC: ‘Phase transformations in materials’; 1992, Upper Saddle, NJ, Prentice Hall.