journal article·2011-01

Fracture behaviour of 8Ni 980 MPa high strength steel at various temperatures Part 2 – COD tests

R. Cao, Y. J. Yan, W. S. Du, Z. L. Tian, Y. Peng, J. H. Chen

Materials Science and Technology· Volume 27· Issue 1
Publisher page

Abstract

The fracture behaviour of 8Ni 980 MPa grade high strength steel is investigated by combining experimental results of crack opening displacement (COD) tests at various temperatures with detailed microscopic observations of fracture surfaces and crack configurations in unloaded specimens. The results reveal that this high strength steel possesses high toughness with a transition temperature around −150°C. Even though at a very low temperature (−196°C), cleavage cracking dominates the fracture process and the crack does not propagate immediately through the entire ligament: a ‘pop-in’ extension is observed in macroscopic tests, and the microscopic fracture mode is quasi-cleavage. It is found that resistance to crack propagation is provided by three barriers: original austenite grain boundaries, bainite colony boundaries and interlayers between bainite laths. These barriers manifest themselves by tear ridges with dimples on the fracture surfaces. At higher temperatures, the fracture mechanism is dominated by fibrous rupture, associated with a ‘dimpled’ fracture surface and some individual quasi-cleavage facets.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China

Key Laboratory of Non-ferrous Metal Alloys, The Ministry of Education, Lanzhou University of Technology, Lanzhou 730050, China

Central Iron and Steel Research Institute, Beijing 100081, China

References (20)

Show source-provided references
1. 10.1016/0013-7944(68)90025-810.1016/0013-7944(68)90025-8 ↗
2. Smith E.: Proc. Conf. on ‘Physical basis of yield and fracture’, (ed. Strickland A. C.), 36–46; 1966, London, Institute of Physics and Physical Society.
3. Knott J. F. · J. Iron Steel Inst. · 1966 · 204 · 104
4. 10.1016/0921-5093(94)90972-510.1016/0921-5093(94)90972-5 ↗
5. 10.1016/S1359-6454(00)00055-010.1016/S1359-6454(00)00055-0 ↗
6. Druce S., Gibson G., and Capel M. I.: in ‘Fracture mechanics: twenty-second symposium’, ASTM STP 1131, 682–706; 1992,Philadelphia, PA, ASTM.
7. 10.1016/j.engfracmech.2004.03.01010.1016/j.engfracmech.2004.03.010 ↗
8. 10.1016/S0022-3115(98)00496-610.1016/S0022-3115(98)00496-6 ↗
9. 10.1179/mst.1986.2.6.57610.1179/mst.1986.2.6.576 ↗
10. 10.1016/0013-7944(83)90042-510.1016/0013-7944(83)90042-5 ↗
11. 10.1007/s11661-000-0007-410.1007/s11661-000-0007-4 ↗
12. 10.1016/S1359-6462(99)00124-410.1016/S1359-6462(99)00124-4 ↗
13. Knott J. F. ‘Fundamentals of fracture mechanics’; 1973, London, Butterworths.
14. 10.1179/mst.1987.3.6.42210.1179/mst.1987.3.6.422 ↗
15. 10.1179/mst.1987.3.6.43210.1179/mst.1987.3.6.432 ↗
16. 10.1179/mst.1987.3.6.44110.1179/mst.1987.3.6.441 ↗
17. in ‘Welding handbook’, 9th edn, Vol. 1, 262; 2001, Miami, FL, AWS.
18. 10.1016/j.msea.2007.09.05710.1016/j.msea.2007.09.057 ↗
19. 10.1007/BF0280116810.1007/BF02801168 ↗
20. Pen J. X. · Trans. CWS · 2007 · 28 · 105