journal article·2012-04

On material flow and aspects of structural modification during direct and indirect extrusion of aluminium alloy

L J Niu, X Velay, Terry Sheppard

Materials Science and Technology· Volume 28· Issue 4
Publisher page

Abstract

In this paper, both direct and indirect extrusions are simulated using a viscoplastic constitutive model. The simulated velocity fields for both direct and indirect extrusions are discussed and compared with experimental results. Advanced numerical techniques are used to trace backward and forward discrete particles of the billet. The effect of friction on the material flow is discussed. Back-end defects are simulated and practical methodologies are derived to minimise such defects using finite element modelling (FEM). Peak loads, temperatures and strain rate distribution are also compared between direct and indirect extrusions. Numerical subroutines have been developed and integrated into the FEM software in order to introduce the possibility of prediction of microstructural evolution. The results of such numerical simulations to increase productivity within the extrusion industry are currently limited only by the lack of sufficient physical metallurgical detail and by obstacles preventing the FEM simulation to be directly applied. This aspect is discussed in some detail.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Design Engineering and Computing Bournemouth University, Fern Barrow, BH12 5BB, Poole, UK

References (22)

Show source-provided references
1. 10.1007/978-1-4757-3001-210.1007/978-1-4757-3001-2 ↗
2. 10.1179/03071698280328577410.1179/030716982803285774 ↗
3. Chadwick R · Met. Mater. · 1970 · 4 · 201
4. Tuschy E · Z. Metallkd. · 1971 · 62 · 513
5. 10.1179/03071698080328676610.1179/030716980803286766 ↗
6. 10.1179/mst.1990.6.8.75510.1179/mst.1990.6.8.755 ↗
7. Valberg H, Malvik T: ‘Metal flow in die channels of extrusion investigated by an experimental grid pattern technique’, Proc. 6th Int. Conf. on ‘Aluminium extrusion technology’, Chicago, IL, USA, May 1996, The Aluminum Association & Aluminum Extruders Council.
8. Valberg H: ‘Experimental techniques to characterize large plastic deformations in un-lubricated hot aluminium extrusion’, Proc. 2nd Extrusion Workshop and Benchmark, Bologna, Italy, September 2007, University of Bologna.10.4028/www.scientific.net/KEM.367.17 ↗
9. 10.1016/S0924-0136(03)00518-110.1016/S0924-0136(03)00518-1 ↗
10. Flitta I, Sheppard T: ‘On the mechanics of friction during the extrusion process’, Proc. 7th Int. Conf. on ‘Aluminium extrusion technology’, Chicago, IL, USA, May 2000, The Aluminum Association & Aluminum Extruders Council.
11. 10.1179/02670830222500494610.1179/026708302225004946 ↗
12. 10.1016/S0924-0136(02)00811-710.1016/S0924-0136(02)00811-7 ↗
13. 10.1179/174328407X15866810.1179/174328407X158668 ↗
14. Subramaniyan J: ‘Extrusion of 2024 aluminium alloy sections’, PhD thesis, University of London, UK, 1989.
15. Sheppard T, Subramaniyan J, McShane HB, Raghunathan N: ‘On property process relationships when extruding AA 2024’, Proc. 2nd Int. Conf. on ‘Aluminium alloys’, Beijing, China, October 1990, International Academic Publisher.
16. 10.1179/mst.1997.13.3.20310.1179/mst.1997.13.3.203 ↗
17. Yoneyama T, Takahashi M: ‘Measurement of pressure and friction on the container surface during aluminium hot extrusion’, Proc. 8th Int. Conf. on ‘Aluminium extrusion technology’, Orlando, FL, USA, May 2004, The Aluminum Association & Aluminum Extruders Council.
18. 10.1179/174328405X2922110.1179/174328405X29221 ↗
19. Grasmo G, Holthe K, Storen S, Valberg H, Flatval R, Hanssen L, Lefstad M, Lohne O, Welo T, Orsund R, Herberg J: ‘Modelling of two-dimensional extrusion’, Proc. 5th Int. Conf. on ‘Aluminium extrusion technology’, Chicago, IL, USA, May 1992, The Aluminum Association & Aluminum Extruders Council.
20. Bandar A, Weertruyden WV, Misiolek WZ: ‘Influence of Geometric Dynamic Recrystallisation in the Dead Metal Zone on Peripheral Coarse Grain’, Proc. 9th Int. Conf. on ‘Aluminium extrusion technology’, Orlando, FL, USA, May 2008, The Aluminum Association & Aluminum Extruders Council.
21. Duan X: ‘Some problems in hot rolling of Al-alloys solved by the finite element method’, PhD thesis, Bournemouth University, UK, 2001.
22. Peng Z: ‘Numerical modelling of the aluminium extrusion process’, PhD thesis, Bournemouth University, UK, 2005.