journal article·2010-11

Low cycle fatigue and creep–fatigue interaction in short fibre reinforced aluminium alloy composite

N. Eswara Prasad, D. Vogt, T. Bidlingmaier, A. Wanner, E. Arzt

Materials Science and Technology· Volume 26· Issue 11
Publisher page

Abstract

The high temperature low cycle fatigue resistance and the creep–fatigue interaction (CFI) behaviour in terms of the effects of prior fatigue exposure on the subsequent creep behaviour are evaluated and reported for a short alumina fibre (Saffil) reinforced aluminium alloy (Al–12Si–CuMgNi) matrix composite at 623 K. The prior fatigue to study the CFI behaviour was imparted in the form of low cycle fatigue loading in a fully reversed, total strain controlled loading up to a quarter of fatigue life at a total strain amplitude of 0·006 (the plastic strain amplitude at half-life is 0·004), corresponding to a plastic strain energy per cycle value of 0·46 MJ m–3. Subsequently, isothermal tensile creep tests were conducted at 623 K to evaluate the minimum creep rate, rupture time and strain to failure as a function of applied creep stress. Also examined were the fracture features as well as the nature and extent of damage that occurs during low cycle fatigue and creep–fatigue loading. The results obtained on the composite material are compared with those of the matrix aluminium alloy to bring out the effects of reinforcement. The results showed that the reinforcement causes significant loss in high temperature low cycle fatigue resistance in terms of fatigue ductility and cyclic energy parameters. Prior fatigue loading was seen to cause a small but consistent decrease in the creep resistance, which is attributed to the combined effects of mechanical loading and microstructural damage from prior fatigue loading.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Regional Centre for Military Airworthiness (Materials), CEMILAC, DRDO PO Kanchanbagh, Hyderabad 500 058, India, Max-Planck-Institut fuer Metallforschung, Heisenbergstrasse 3, 70569 Stuttgart, Germany;, Email: rdrcma.mat@cemilac.drdo.in

Max-Planck-Institut fuer MetallforschungHeisenbergstrasse 3, 70569 Stuttgart, Germany

Institut fuer Metallkunde und der Universitaet of StuttgartHeisenbergstrasse 3, 70569 Stuttgart, Germany

Institute fuer WerkstoffkundeUniverisitaet Karlsruhe (TH), Kaiserstrasse 12, 76131 Karlsruhe, Germany

Leibniz Institute for New Materials, Saarland University, Campus D2 2, 66123 Saarbrucken, Germany

References (55)

Show source-provided references
1. 10.1179/imr.1985.30.1.27510.1179/imr.1985.30.1.275 ↗
2. Hunt W. H., Cook C. R., and Sawtell R. R.: SAE technical paper series no. 910834, SAE, Warrendale, PA, USA, 1991.
3. 10.1016/0921-5093(91)90569-910.1016/0921-5093(91)90569-9 ↗
4. 10.1179/mst.1991.7.7.59610.1179/mst.1991.7.7.596 ↗
5. 10.1016/j.msea.2006.01.02410.1016/j.msea.2006.01.024 ↗
6. Mueller-Schwelling D. · Motortechn. Z · 1988 · 49 · 59
7. 10.1016/0921-5093(93)90346-G10.1016/0921-5093(93)90346-G ↗
8. B& J. · Scr. Metall Mater · 1993 · 29 · 78710.1016/0956-716X(93)90227-J ↗
9. Bidlingmaer T., Wolf A., Wanner A., and Arzt E.: Proc. Conf. Werkstoffwoche ‘98, Munich, Germay, October 1998, DGM, 471.
10. Bidlingmaier T., Vogt D., Wanner A., and Arzt E.: Proc. Conf. Werkstoffwoche ‘96, Frankfurt, Germany, May 1997, DGM Informationsgesellschaft mbH, 493.
11. Seitz T., Bar J., and Gudladt H. J. ‘Metal matrix composites — processing, microstructure and properties’, Proc. 12th Riso Int. Symp. on ‘Materials science’, (ed.Hansel N. et al), 649; 1991, Roskilde, Riso.
12. 10.1016/S0921-5093(99)00492-X10.1016/S0921-5093(99)00492-X ↗
13. Eswara Prasad N. · Z. Metallkd · 2000 · 91 · 190
14. Flaig A., Wanner A., and Arzt E.: in ‘Low cycle fatigue and elasto-plastic behaviour of materials’, (ed. Rie K. T., and Portella P. D.), 449; 1998, Amsterdam, Elsevier Science Ltd.10.1016/B978-008043326-4/50077-5 ↗
15. Paul J. · Z. Metallkd · 1990 · 81 · 816
16. Kelly A. · Proc. Roy. Soc. Lond. A · 1972 · 328 · 26710.1098/rspa.1972.0077 ↗
17. 10.1007/BF0264439610.1007/BF02644396 ↗
18. 10.1016/0036-9748(89)90234-210.1016/0036-9748(89)90234-2 ↗
19. 10.1016/0956-7151(91)90264-210.1016/0956-7151(91)90264-2 ↗
20. 10.1007/BF0266109610.1007/BF02661096 ↗
21. Dragone T. L., and Nix W. D.: Acta Metall Mater. 1992,0, 2781.10.1016/0956-7151(92)90348-I ↗
22. 10.1016/0956-7151(93)90054-V10.1016/0956-7151(93)90054-V ↗
23. 10.1016/0956-7151(94)00255-G10.1016/0956-7151(94)00255-G ↗
24. McEvily A. J. · Trans. Metall Soc. AIME · 1963 · 221 · 1093
25. 10.1016/0001-6160(66)90171-410.1016/0001-6160(66)90171-4 ↗
26. 10.1007/BF0018268710.1007/BF00182687 ↗
27. Lynch S. P. · Aluminium · 1973 · 49 · 748
28. 10.1016/0025-5416(74)90182-710.1016/0025-5416(74)90182-7 ↗
29. 10.1016/0001-6160(89)90278-210.1016/0001-6160(89)90278-2 ↗
30. 10.1179/mst.1991.7.11.99110.1179/mst.1991.7.11.991 ↗
31. Leslie W. C. · Trans. Am. Soc. Met · 1967 · 60 · 459
32. Hirth J. P., and Cohen M.: Metall Trans. 1970,1, 3.10.1007/BF02819235 ↗
33. Olsen R. J. · Trans. Am. Soc. Met · 1969 · 62 · 711
34. Kalish D. · Trans. Am. Soc. Met · 1969 · 62 · 353
35. 10.1016/0036-9748(71)90229-810.1016/0036-9748(71)90229-8 ↗
36. Chait R.: Metall Trans. 1972, 3, 365.10.1007/BF02642040 ↗
37. 10.1016/0036-9748(75)90168-410.1016/0036-9748(75)90168-4 ↗
38. 10.1016/0001-6160(77)90236-X10.1016/0001-6160(77)90236-X ↗
39. Moan G. D., and Embury J. D.: Acta Metall. 1979,27, 903.10.1016/0001-6160(79)90125-1 ↗
40. 10.1179/cmq.1981.20.3.33110.1179/cmq.1981.20.3.331 ↗
41. Chung Y. S., and Abel A.: Proc. 6th Int. Conf. on ‘Strength of metals and alloys’,Vol. 2, 825; 1983, New York, Pergamon Press.10.1016/B978-1-4832-8423-1.50134-6 ↗
42. 10.1016/0025-5416(87)90542-810.1016/0025-5416(87)90542-8 ↗
43. 10.1016/0921-5093(92)90115-H10.1016/0921-5093(92)90115-H ↗
44. 10.1016/0010-4361(93)90177-A10.1016/0010-4361(93)90177-A ↗
45. 10.1016/0266-3538(93)90105-P10.1016/0266-3538(93)90105-P ↗
46. Basquin O. H. · Proc. ASTM · 1910 · 10 · 625
47. Manson S. S.: NASA technical note no. 2933, 1953.
48. Coffin L. F. · Trans. ASME · 1954 · 76 · 931
49. Morrow J. D.: ASTM STP no. 378, ASTM, Philadelphia, PA, USA, 1965, 45.
50. Halford H. R. · J. Mater · 1966 · 3 · 3
51. 10.1016/0956-716X(94)90297-610.1016/0956-716X(94)90297-6 ↗
52. 10.1179/mst.1996.12.7.56310.1179/mst.1996.12.7.563 ↗
53. 10.1179/02670830010150800910.1179/026708300101508009 ↗
54. Eswara Prasad N. · Trans. Indian Inst. Met · 2004 · 57 · 181
55. Monkmann F. C. · Proc. Am. Soc. Test. Mater · 1956 · 56 · 593