journal article·2019-03

Initial microstructure and retained austenite in 8 Mn steel controlled by cooling rate

Reny Angela Renzetti, Vanda da Piedade Santos, Ernesto Soares Freitas Neto, Fábio Nakagomi, Marcio Assolin Corrêa, Acácio Silveira Melo, Dagoberto Brandão Santos, Guilherme Oliveira Siqueira

Materials Science and Technology· Volume 35· Issue 5
Publisher page

Abstract

The present work investigates the effect of the initial microstructure on phase transformation after intercritical annealing by measuring the amount of austenite, which was obtained by X-ray diffraction and saturation magnetisation. Pieces of 8 Mn steel were austenitised at 1100°C for 1 h followed by different cooling rates: water, air, and furnace. Samples of each piece were subsequently intercritically annealed from 600 to 800°C followed by air cooling. The microstructure was characterised using scanning electron microscopy and electron backscatter diffraction. Results show how changing the cooling rate affects the temperature of intercritical annealing at which the highest content of retained austenite was obtained.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de Itajubá – UNIFEI, Itabira, Brazil

Departamento de Física, Universidade Federal do Rio Grande do Norte, Natal, Brazil

Departamento de Engenharia Metalúrgica e de Materiais – Escola de Engenharia da, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil

Funding

Brazilian Synchrotron Light Source Laboratory

References (26)

Show source-provided references
1. 10.1016/S0921-5093(01)00965-010.1016/S0921-5093(01)00965-0 ↗
2. 10.1179/174328408X35372310.1179/174328408X353723 ↗
3. 10.1016/j.cossms.2004.09.00610.1016/j.cossms.2004.09.006 ↗
4. 10.1016/j.cossms.2004.10.00210.1016/j.cossms.2004.10.002 ↗
5. 10.1080/02670836.2018.146361310.1080/02670836.2018.1463613 ↗
6. 10.1007/s11661-016-3338-510.1007/s11661-016-3338-5 ↗
7. 10.1007/s11661-015-2822-710.1007/s11661-015-2822-7 ↗
8. 10.1007/s11661-013-1860-210.1007/s11661-013-1860-2 ↗
9. 10.1007/s11661-014-2657-710.1007/s11661-014-2657-7 ↗
10. 10.1016/j.msea.2017.11.11810.1016/j.msea.2017.11.118 ↗
11. 10.1016/j.actamat.2018.01.00910.1016/j.actamat.2018.01.009 ↗
12. Wirthl E · 2000
13. Larson AC, Von Dreele RB. General structure analysis system (GSAS), Los Alamos National Laboratory Report LAUR; 1994; p. 86–748.
14. 10.1107/S002188980100224210.1107/S0021889801002242 ↗
15. 10.1016/j.actamat.2017.02.00410.1016/j.actamat.2017.02.004 ↗
16. 10.1016/j.matdes.2018.01.02610.1016/j.matdes.2018.01.026 ↗
17. 10.1007/s11665-014-1337-510.1007/s11665-014-1337-5 ↗
18. 10.1016/j.jmmm.2003.11.26610.1016/j.jmmm.2003.11.266 ↗
19. 10.1088/0022-3727/35/17/30310.1088/0022-3727/35/17/303 ↗
20. 10.1063/1.135916710.1063/1.1359167 ↗
21. 10.1016/j.matchar.2016.03.02310.1016/j.matchar.2016.03.023 ↗
22. Bozorth RM. Ferromagnetism. New York: D.van Nostrad Company Inc.; 1951; p. 367.
23. 10.1016/j.actamat.2014.11.01010.1016/j.actamat.2014.11.010 ↗
24. 10.1016/j.scriptamat.2011.04.01010.1016/j.scriptamat.2011.04.010 ↗
25. 10.2355/isijinternational.ISIJINT-2016-73310.2355/isijinternational.ISIJINT-2016-733 ↗
26. 10.1039/c3cp50549a10.1039/c3cp50549a ↗