Fe–15 wt-Cr–X wt-C hardfacing surface layer: Wear resistance and its enhanced mechanism with C additive
Source abstract
Abstract
An electrode with different C additives was developed. The microstructure of the hardfacing surface layer was observed by optical microscopy. The phase structure was determined by X-ray diffraction. The hardness and wear resistance of the hardfacing surface layer were measured respectively. The worn-out surface and three-dimensional morphology were observed by field emission scanning electron microscope equipped with energy dispersive X-ray spectrometry. The relation curve between mass fraction of M7C3 carbide and temperature was calculated according to thermodynamics software Thermo-Calc. The results show that, with the increase in C additive, the hardfacing surface layer changes from a hypoeutectic structure to a hypereutectic one. Meanwhile, the primary phase changes from austenite to carbide. The hardness and wear resistance of the hardfacing surface layer increase gradually with the increase in C additive, and when the C additive is 25 wt-, they are the largest. With the increase in C content, the precipitation temperature of M7C3 decreases from 1280 to 1260°C, while the maximum amount of M7C3 increases instead, which is from 0·154 to 0·313. The reason of the improvement for wear resistance of the hardfacing surface layer is that the carbide initiates and the amount of M7C3 increases.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Metastable Materials Science and Technology, College of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004, China
School of Engineering, Liverpool John Moores University, Liverpool L3 3AF, UK
State Key Laboratory of Metastable Materials Science and Technology, College of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004, China, email qxyang@ysu.edu.cn
References (21)
Show source-provided references
1. 10.1016/S0169-4332(96)00552-110.1016/S0169-4332(96)00552-1 ↗
2. 10.1016/j.surfcoat.2006.01.01010.1016/j.surfcoat.2006.01.010 ↗
3. 10.1016/j.apsusc.2012.03.10110.1016/j.apsusc.2012.03.101 ↗
4. 10.1016/j.wear.2011.02.00610.1016/j.wear.2011.02.006 ↗
5. 10.1016/j.jallcom.2010.06.08410.1016/j.jallcom.2010.06.084 ↗
6. Yang QX · J. Rare Earths · 2000 · 18 · 138
7. 10.1016/j.wear.2007.04.00810.1016/j.wear.2007.04.008 ↗
8. 10.1016/j.apsusc.2008.01.15410.1016/j.apsusc.2008.01.154 ↗
9. Toshihiko S · Mater. Charact. · 1998 · 40 · 5023
10. 10.1016/S0921-5093(02)00588-910.1016/S0921-5093(02)00588-9 ↗
11. 10.1016/j.msea.2005.03.07210.1016/j.msea.2005.03.072 ↗
12. 10.1016/j.matlet.2007.06.08410.1016/j.matlet.2007.06.084 ↗
13. 10.1016/j.jallcom.2010.10.04610.1016/j.jallcom.2010.10.046 ↗
14. 10.1016/j.mseb.2011.05.02210.1016/j.mseb.2011.05.022 ↗
15. 10.1016/j.surfcoat.2011.06.02710.1016/j.surfcoat.2011.06.027 ↗
16. 10.1016/S0925-8388(01)01530-410.1016/S0925-8388(01)01530-4 ↗
17. Liang H · Mater. Sci. Eng. A · 2007 · 448 · 12810.1016/j.msea.2006.11.001 ↗
18. 10.1016/j.matchemphys.2010.09.06410.1016/j.matchemphys.2010.09.064 ↗
19. 10.1016/j.matchar.2009.11.01110.1016/j.matchar.2009.11.011 ↗
20. 10.1016/j.scriptamat.2007.02.02910.1016/j.scriptamat.2007.02.029 ↗
21. 10.1016/j.sab.2007.11.02410.1016/j.sab.2007.11.024 ↗