journal article·2006-05

Precipitation in vanadium bearing ultralow carbon strip steels

S. W. Ooi, G. Fourlaris, D. A. Tanner, J. S. Robinson

Materials Science and Technology· Volume 22· Issue 5
Publisher page

Abstract

Two novel ultralow carbon (ULC) steels were investigated, one based on combined vanadium and titanium additions and the second based on titanium only additions. Grain size and mechanical property measurements have been performed on continuously annealed specimens previously subjected to 80% cold rolling reduction on both strip steel grades. The recrystallisation and grain coarsening characteristics of annealed ULC strips have been studied. The amount of precipitated species, under equilibrium conditions, at various annealing temperatures has also been calculated using MT-DATA thermodynamic modelling software. Transmission electron microscopy characterisation coupled with EDX study of the precipitation sequences on continuous annealing strips was also performed. Precipitate studies of the novel ULC steels confirmed the major role of TiC precipitates in retarding the recrystallisation behaviour of ULC strip steels. The role of vanadium addition in ULC steel grades in reducing the recrystallisation temperature of ULC strip steels was also identified.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Lowe K.: Intermaterial competition for the body in white of the passenger car/Committee on Economic Studies, Committee on Promotion and Market Development, Committee on Technology’, 1.5-1.6; International Iron and Steel Institute, Brussels, 1990.
2. Satoh S., Obara T., Nishida M., and Irie T.: in ‘Technology of continuously annealed cold-rolled sheet steel’, Detroit, MI, USA, 1984, TMS,151–166.
3. Leslie W. C. · ASM Trans · 1967 · 60 · 99
4. Gladman T.: in ‘The physical metallurgy of microalloyed steels’, 81, 150-151, 207, 324; 1997, London, The Institute of Materials.
5. Krupic V., Gladman T., and Mitchell P.: Proc. 37th Conf. on ‘Mechanical working and steel processing’, Hamilton, ON, Canada, 1995, ISS,907–914.
6. 10.1016/S0364-5916(02)00036-610.1016/S0364-5916(02)00036-6 ↗
7. 10.2355/isijinternational.42.88910.2355/isijinternational.42.889 ↗
8. Lagneborg R. · Scand. J. MetalL · 1999 · 28 · 186
9. 10.1016/0921-5093(93)90662-X10.1016/0921-5093(93)90662-X ↗
10. 10.1007/978-1-4899-5880-810.1007/978-1-4899-5880-8 ↗
11. 10.2355/isijinternational.34.910.2355/isijinternational.34.9 ↗
12. 10.2355/tetsutohagane1955.83.8_47910.2355/tetsutohagane1955.83.8_479 ↗
13. 10.1016/S0921-5093(99)00737-610.1016/S0921-5093(99)00737-6 ↗
14. 10.2355/isijinternational.34.6110.2355/isijinternational.34.61 ↗
15. Girina O. · ISS Mech. Work. Steel Process. Conf. Proc · 1999 · 41 · 435
16. 10.1179/cmq.2000.39.3.36910.1179/cmq.2000.39.3.369 ↗
17. Geise J. · Z. Metallk · 1985 · 76 · 622
18. 10.1002/pssa.221148020910.1002/pssa.2211480209 ↗
19. Geise J. · Z. Metallk · 1987 · 78 · 291
20. Pickering F. B.: in ‘Materials science and technology: a compre-hensive treatment’, 337–374; 1992, Weinheim, New York, Wiley-VCH.
21. Martin J. W., and Doherty R. D.: in ‘Stability of microstructure in metallic system’, 93–96; 1976, Cambridge, Cambridge University Press.
22. 10.1016/1359-6462(96)00020-610.1016/1359-6462(96)00020-6 ↗