journal article·2014-04

Microstructure evolution of directionally solidified Nb–Si alloy

J. F. Weng, L. N. Jia, S. N. Yuan, L. F. Su, F. Ding, H. Zhang

Materials Science and Technology· Volume 30· Issue 4
Publisher page

Abstract

By taking the method of liquid–metal cooled directional solidification, alloys with a nominal composition of Nb–14Si–24Ti–10Cr–2Al–2Hf (at-) were prepared under different conditions. Alloys were initially directional solidified with different withdrawal rates ( R = 1·2, 6, 18 mm min−1) at 1750°C and subsequently heat treated at 1450°C for 10 h. These processes aimed to investigate the microstructure of directionally solidified (DS) and heat treated (HT) alloys by XRD, SEM, and EDS. The microstructure of DS alloy was composed of (Nb,Ti)SS, (Nb,Ti)5Si3, and Laves phase Cr2Nb, and the former two components formed (Nb,Ti)SS+(Nb,Ti)5Si3 eutectics. In addition, (Nb,Ti)5Si3 laths only presented in DS1·2 alloy. With the increasing withdrawal rates, the microstructure of alloy altered from hypereutectic into pseudo-eutectic, accompanied with the eutectic morphology transformation from petaloid into coupled. Also, the dimension of constituent phases reduced. However, after heat treatment, the constituent phases did not change. The petaloid morphology of eutectics in DS specimens disappeared and coupled eutectic transferred into network. The block or needle-like Cr2Nb gathered along the boundary between (Nb,Ti)5Si3 and (Nb,Ti)SS, and the overall alloy composition became homogenisation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Beihang University, Beijing 100191, China

References (18)

Show source-provided references
1. 10.1126/science.117932710.1126/science.1179327 ↗
2. 10.1007/BF0259562910.1007/BF02595629 ↗
3. 10.1007/s11661-003-0269-810.1007/s11661-003-0269-8 ↗
4. 10.1002/0470845856.ch2610.1002/0470845856.ch26 ↗
5. 10.1007/BF0322136110.1007/BF03221361 ↗
6. 10.1007/BF0322136010.1007/BF03221360 ↗
7. 10.1007/BF0291440210.1007/BF02914402 ↗
8. Bewlay B. P., in ‘Processing and fabrication of advanced materials for high temperature applications III’, (ed. Ravi V. A. et al.), 547–565; 1994, Warrendale, PA, The Minerals, Metals & Materials Society.
9. 10.1016/S0257-8972(97)00639-710.1016/S0257-8972(97)00639-7 ↗
10. 10.1016/0956-7151(94)00391-T10.1016/0956-7151(94)00391-T ↗
11. 10.1007/s11837-999-0077-810.1007/s11837-999-0077-8 ↗
12. 10.1016/S1003-6326(11)60919-910.1016/S1003-6326(11)60919-9 ↗
13. 10.1016/j.matlet.2012.06.04410.1016/j.matlet.2012.06.044 ↗
14. 10.1016/j.msea.2012.10.01110.1016/j.msea.2012.10.011 ↗
15. 10.1016/S1003-6326(11)60854-610.1016/S1003-6326(11)60854-6 ↗
16. Sekido N. · JAC · 2006 · 425 · 223
17. 10.1016/j.intermet.2006.08.01610.1016/j.intermet.2006.08.016 ↗
18. Hu H. (ed.): ‘Principle of metal solidification’; 1991, Beijing, Mechanical Industry Press.