journal article·2010-12

Microstructural evolution and flow behaviour during hot compression of twin roll cast ZK60 magnesium alloy

Z. Y. Liu, A. J. Duan, Y. H. Hou, S. Kang, J. Cho

Materials Science and Technology· Volume 26· Issue 12
Publisher page

Abstract

Microstructural evolution and flow behaviour during hot compression of twin roll cast ZK60 magnesium alloy were characterised by employing deformation temperatures of 300, 350 and 400°C and strain rate ranging from 10−3 to 100 s−1. When compressed at 10−3 s−1, all stress–strain curves at different temperatures (300, 350 and 400°C) showed a flow softening behaviour due to active dynamic recrystallisation. When compressed at 10−2 s−1 and elevated temperatures (300, 350 and 400°C), all stress–strain curves showed a flow stress drop after peak stress due to twinning for 300 and 350°C deformation and recrystallisation for 400°C deformation. The balance between shear deformation and recrystallisation resulted in a steady flow behaviour after the true strain reached 0·22. When strain rate increased to 10−1 s−1, a small fraction of dynamic recrystallisation in shear deformation region was responsible for slight flow softening behaviour during compression. A flow hardening appeared due to basal and non-basal slips when deformed at 100 s−1. It is suggested that the flow behaviour during hot compression of twin roll cast ZK60 alloy depends on the separating effect or combined effects of shear deformation, twinning and recrystallisation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Nonferrous Metal Materials Science and EngineeringMinistry of Education, Central South University, Changsha 410083, China; School of Material Science and Engineering, Central South University, Changsha, China

Korea Institute of Material ScienceChangwon, Korea

References (31)

Show source-provided references
1. Spigarelli S., El Mehtedi M., Cabibbo M., Evangelista E., Kaneko J., Jager A., and Gartnerova V.: Mater. Sci. Eng. A, 2007, A462,197–201.10.1016/j.msea.2006.03.155 ↗
2. Eddahbi M., del Valle J. A., Perez-Prado M. T., and Ruano O. A.: Mater. Sci. Eng. A, 2005, A410-411,308–311.10.1016/j.msea.2005.08.081 ↗
3. 10.1016/j.jallcom.2007.06.05010.1016/j.jallcom.2007.06.050 ↗
4. 10.1016/j.jmatprotec.2007.01.01010.1016/j.jmatprotec.2007.01.010 ↗
5. Barnett M. R.: Mater. Sci. Eng. A, 2007, A464, 1–7.
6. Barnett M. R.: Mater. Sei. Eng. A, 2007, A464,8–16.
7. Walde T., and Riedel H.: Mater. Sci. Eng. A, 2007, A443, 277–284.10.1016/j.msea.2006.09.028 ↗
8. Proust G., Tome C. N., and Kaschner G. C.: Acta Mater., 2007,55,10.1016/j.actamat.2006.11.017 ↗
9. 10.1016/j.actamat.2007.03.00610.1016/j.actamat.2007.03.006 ↗
10. Cottam R., Robson J., Lorimer G., and Davis B.: Mater. Set Eng.
11. El-Morsy A., Ismail A., and Waly M.: Mater. Set Eng. A, 2008,
12. Yang Z., Guo Y. C., Li J. P., He F., Xian F., and Liang M. X.
13. 10.2320/matertrans.44.261710.2320/matertrans.44.2617 ↗
14. Park S. S., Oh Y. S., Kang D. H., and Kim N. J.: Mater. Set Eng.
15. 10.1016/j.scriptamat.2006.10.04010.1016/j.scriptamat.2006.10.040 ↗
16. 10.1016/j.scriptamat.2004.03.02310.1016/j.scriptamat.2004.03.023 ↗
17. 10.1016/j.actamat.2006.11.01710.1016/j.actamat.2006.11.017 ↗
18. 10.1016/j.msea.2007.02.08810.1016/j.msea.2007.02.088 ↗
19. Brown D. W. · R. Kaibyshev and G. Gottstein: Acta Mater · 2005 · 399 · 1
20. 10.1016/S1359-6454(01)00020-910.1016/S1359-6454(01)00020-9 ↗
21. Ion S. E., Humphreys F. J., and White S. H.: Acta Metall. 1982, 30, 1909–1919.10.1016/0001-6160(82)90031-1 ↗
22. Sivakesavam O. · Mater. Set Technol · 1993 · 9 · 805
23. Zhang Y., Zeng X. Q., Lu C., and Ding W. J.: Mater. Set Eng. A, 2006, A428,91–97.10.1016/j.msea.2006.04.103 ↗
24. Belyakov A., Miura H., and Sakai T.: Mater. Set Eng. A, 1998, A255, 139.10.1016/S0921-5093(98)00784-9 ↗
25. Spigarelli S., El Mehtedi M., Cabibbo M., Evangelista E., Kaneko J., Jagerc A., and Gartnerova V.: Mater. Set Eng. A, 2007, A462,197–201.10.1016/j.msea.2006.03.155 ↗
26. 10.1016/0965-9773(95)00203-010.1016/0965-9773(95)00203-0 ↗
27. 10.1016/0965-9773(95)00135-210.1016/0965-9773(95)00135-2 ↗
28. 10.1016/j.scriptamat.2005.11.02910.1016/j.scriptamat.2005.11.029 ↗
29. Wang Y. N., and Huang J. C.: Acta Mater. 2007, 55, 897–905.10.1016/j.actamat.2006.09.010 ↗
30. Jain A., and Agnew S. R.: Mater. Set Eng. A, 2007, A462,29–36.10.1016/j.msea.2006.03.160 ↗
31. Karaman I., Sehitoglu H., Maier H. J., and Chumlyakov Y. I.: Acta Mater. 2001, 49, 3919–3933.10.1016/S1359-6454(01)00296-8 ↗