journal article·2009-02

Novel experimentation techniques to study damage accumulation and microstructural instability during creep of super alloy single crystals at high temperatures (>1000°C)

G. Eggeler

Materials Science and Technology· Volume 25· Issue 2
Publisher page

Abstract

The objective of the present work is to demonstrate that it is well worth the effort to develop novel experimentation techniques to study creep in Ni base super alloy single crystals above 1000°C. A miniature tensile creep specimen and a double shear creep specimen have been developed. These are useful in high temperature technology because they can be directly taken out from cast turbine blades (miniature tensile creep specimens) and provide multiaxial creep data (double shear creep specimens). Most importantly, these new techniques can be used to increase the level of microstructural understanding of creep. Thus miniature tensile creep experiments can be used to demonstrate that <100> directions parallel to, and perpendicular to, the solidification direction differ in creep rupture behaviour. This is related to the presence of cast micropores which align along primary dendrites. The double shear creep specimens, on the other hand, help in understanding the influence of stress multiaxiality on rafting, the directional coarsening of the γ′ phase. In a macroscopic crystallographic shear system of type <110> {110}, rafting occurs at 45° to the shear direction and is governed by the maximum principal stress.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. 10.1017/CBO978051154128510.1017/CBO9780511541285 ↗
2. Sims C. T.: in ‘Superalloys 1984’, (ed.Gell M. et al.), 399; 1984, Warrendale, PA, TMS.10.7449/1984/Superalloys_1984_399_419 ↗
3. 10.1016/0956-7151(92)90195-K10.1016/0956-7151(92)90195-K ↗
4. 10.1007/s11661-006-9007-310.1007/s11661-006-9007-3 ↗
5. 10.1007/s10853-006-0166-910.1007/s10853-006-0166-9 ↗
6. Srinivasan R., Eggeler G., and Mills M. J.: Acta Mater. 2000, 48, 4867.10.1016/S1359-6454(00)00292-5 ↗
7. Murken J. · Proc. Baltica V Conf., (ed.
8. Sahm P. R., and Speidel M. O. ‘High-temperature materials in gas turbines’; 1974, London, Elsevier.
9. 10.1007/978-94-009-8111-910.1007/978-94-009-8111-9 ↗
10. McClean M. ‘Directionally solidified materials for high tempera-ture service’; 1993, London, The Metals Society.
11. Ilschner B. ‘Hochtemperaturplastizität% 1973, Berlin, Springer-Verlag.
12. Cadek J. ‘Creep in metallic materials’; 1988, Amsterdam, Elsevier.
13. Nabarro F. R. N., and Villiers H. L. ‘The physics of creep’; 1995, London, Taylor and Francis.
14. Burgel R. ‘Handbuch der Hochtemperatur-Werkstofftechnik’; 2001, Braunschweig/Wiesbaden, Vieweg.
15. McDemus R.: in ‘Metals handbook’, 9th edn,Vol. 8, ‘Mechanical testing’, 311; 1985, Metals Park, OH, ASM.
16. 10.1002/mawe.1998029030610.1002/mawe.19980290306 ↗
17. Maelzer G., Kostka A., Eggeler G., Reese S., and Mack T.: TMS Lett. 2005, 2, 27.
18. 10.1002/(SICI)1521-4052(199908)30:8<465::AID-MAWE465>3.0.CO;2-L10.1002/(SICI)1521-4052(199908)30:8<465::AID-MAWE465>3.0.CO;2-L ↗
19. Mälzer G. · 2007
20. Mayr C., Eggeler G., and Dlouhy A.: Proc. 10th Int. Conf. on ‘Strength of metals and alloys’, Sendai, Japan, August 1994, The Japanese Institute of Metals, 709.
21. Mayr C., Eggeler G., Webster G. A., and Peter G.: Mater. Sci. Eng. A, 1995, A199, 121.10.1016/0921-5093(94)09721-6 ↗
22. Ch. Mayr: ‘Metallkundliche Untersuchungen zum zweiachsigen Kriechen von Superlegierungseinkristallen’, PhD thesis, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, 1995.
23. Kolbe M., Dlouhy A., Mayr C., and Eggeler G.: in ‘Creep and fracture of engineering materials and structures’, (ed. Earthman J. C., and Mohamed F. A.), 677; 1997, Warrendale, PA, TMS.
24. 10.1002/mawe.1997028100610.1002/mawe.19970281006 ↗
25. 10.1002/mawe.20039009510.1002/mawe.200390095 ↗
26. Bouse G. K., and Mihalisin J. R.: in ‘Superalloys, supercomposites and superceramics'; 99, 1989, San Diego, CA, Academic Press.10.1016/B978-0-12-690845-9.50010-5 ↗
27. Mayr C., Eggeler G., and Dlouhy A.: Mater. Sci. Eng. A, 1996, A207, 51.10.1016/0921-5093(96)80002-5 ↗
28. Kolbe M., Neuking K., and Eggeler G.: Mater. Sci. Eng. A, 1997, A234-236, 877.10.1016/S0921-5093(97)00366-3 ↗
29. Eggeler G., and Dlouhy A.: Acta Mater. 1997, 45, 4251.10.1016/S1359-6454(97)00084-0 ↗
30. Srinivasan R., Eggeler G., and Mills M. J.: Acta Mater. 2000, 48, 4867.10.1016/S1359-6454(00)00292-5 ↗
31. Probst-Hein M., Dlouhy A., and Eggeler G.: Acta Mater. 1999, 47, 2497.10.1016/S1359-6454(99)00092-0 ↗
32. Sarosi P. M., Srinivasan R., Eggeler G., Nathal M. V., and Mills M. J.: Acta Mater. 2007, 55, 2509.10.1016/j.actamat.2006.11.045 ↗
33. 10.1007/BF0264894210.1007/BF02648942 ↗
34. 10.1016/S1359-6462(97)00520-410.1016/S1359-6462(97)00520-4 ↗
35. Serin K. · Prakt. Metallogr · 2001 · 38 · 679
36. Serin K. · 2002
37. Göbenli G. · ‘Ein-und mehrachsiges Kriechverhalten von Nickelbasis-Superlegierungen oberhalb 1000°C’ · 2005
38. Serin K., Göbenli G., and Eggeler G.: Mater. Sci. Eng. A, 2004, A387-389, 133.10.1016/j.msea.2004.01.114 ↗
39. Dieter G. E. ‘Mechanical metallurgy’, 1988, London, Mc-Graw-Hill Book Company.
40. Kolbe M., Dlouhy A., and Eggeler G.: Mater. Sci. Eng. A, 1997, A246, 133.