journal article·2014-05

Constitutive description of severely deformed metals based on dimensional analysis

M. Montazeri-Pour, M. H. Parsa, H. Mirzadeh

Materials Science and Technology· Volume 30· Issue 6
Publisher page

Abstract

A constitutive equation for description of mechanical behaviour of metals at large strains was proposed to relate the important process variables associated with severe plastic deformation. Dimensional analysis based on the so called π-theorem was used for this purpose; in which the obtained dimensionless groups were related and rewritten to achieve the constitutive equation. The validity of the proposed relationship was investigated using the flow stress data of an aluminium alloy processed by accumulative roll bonding (ARB), copper processed by equal channel angular pressing (ECAP) and low carbon steel processed by constrained groove pressing (CGP) technique. It was shown that the predictions of the proposed model agree well with the experimental observations over a wide range of strain for different materials. Moreover, this model was able to address both hardening and softening at high strains. These prove the applicability of the π-theorem as an alternative approach to derive the constitutive relationships of heavily deformed metals with emphasis on the microstructure evolution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, PO Box 11155-4563, Tehran, Iran

Center of Excellence for High Performance Materials, School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran

Advanced Metalforming and Thermomechanical Processing Laboratory, School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran

References (42)

Show source-provided references
1. 10.1179/174328408X35375010.1179/174328408X353750 ↗
2. 10.1016/j.jmapro.2013.02.00110.1016/j.jmapro.2013.02.001 ↗
3. 10.1016/j.actamat.2012.10.03810.1016/j.actamat.2012.10.038 ↗
4. 10.4028/www.scientific.net/SSP.35-36.110.4028/www.scientific.net/SSP.35-36.1 ↗
5. 10.1007/s10853-010-4595-010.1007/s10853-010-4595-0 ↗
6. 10.1016/j.actamat.2005.06.03310.1016/j.actamat.2005.06.033 ↗
7. 10.1016/j.msea.2004.04.06710.1016/j.msea.2004.04.067 ↗
8. 10.1016/j.msea.2005.08.04710.1016/j.msea.2005.08.047 ↗
9. 10.1016/S1359-6454(98)00196-710.1016/S1359-6454(98)00196-7 ↗
10. 10.1016/S0921-5093(02)00847-X10.1016/S0921-5093(02)00847-X ↗
11. 10.3139/146.03075410.3139/146.030754 ↗
12. 10.1115/1.142135010.1115/1.1421350 ↗
13. 10.1016/j.matdes.2011.04.01110.1016/j.matdes.2011.04.011 ↗
14. 10.1016/j.actamat.2006.12.03810.1016/j.actamat.2006.12.038 ↗
15. 10.1007/s00170-009-2239-910.1007/s00170-009-2239-9 ↗
16. 10.1016/j.actamat.2004.04.00910.1016/j.actamat.2004.04.009 ↗
17. 10.1016/j.actamat.2008.05.02510.1016/j.actamat.2008.05.025 ↗
18. 10.1016/j.matdes.2013.05.02110.1016/j.matdes.2013.05.021 ↗
19. 10.1103/PhysRev.4.34510.1103/PhysRev.4.345 ↗
20. 10.1016/0016-0032(73)90213-510.1016/0016-0032(73)90213-5 ↗
21. Malvern L. E. ‘Introduction to the mechanics of a continuous medium’; 1969, New Jersey, Prentice-Hall Inc.
22. Szirtes T. ‘Applied dimensional analysis and modeling’, 2nd edn; 2007, Amsterdam, Elsevier.10.1016/B978-012370620-1/50009-5 ↗
23. 10.1016/j.actamat.2004.05.01810.1016/j.actamat.2004.05.018 ↗
24. 10.1016/j.matdes.2006.08.00610.1016/j.matdes.2006.08.006 ↗
25. 10.1016/j.msea.2006.02.45510.1016/j.msea.2006.02.455 ↗
26. 10.1016/j.jallcom.2008.06.16110.1016/j.jallcom.2008.06.161 ↗
27. 10.1016/j.actamat.2006.07.00810.1016/j.actamat.2006.07.008 ↗
28. 10.1016/j.matdes.2011.02.03210.1016/j.matdes.2011.02.032 ↗
29. Dieter G. E. ‘Mechanical metallurgy’, 3rd edn; 1988, New York, McGraw-Hill.
30. Murr L. E. ‘Interfacial phenomena in metals and alloys’; 1975, London, Addison-Wesley.
31. 10.1179/msc.1967.1.1.12310.1179/msc.1967.1.1.123 ↗
32. 10.1016/0001-6160(82)90221-810.1016/0001-6160(82)90221-8 ↗
33. 10.1016/j.actamat.2008.12.00210.1016/j.actamat.2008.12.002 ↗
34. 10.1016/B978-008044164-1/50011-610.1016/B978-008044164-1/50011-6 ↗
35. 10.1016/S1359-6454(00)00289-510.1016/S1359-6454(00)00289-5 ↗
36. 10.1016/j.actamat.2004.06.04010.1016/j.actamat.2004.06.040 ↗
37. 10.1016/j.actamat.2006.04.02510.1016/j.actamat.2006.04.025 ↗
38. 10.1016/j.msea.2005.08.10710.1016/j.msea.2005.08.107 ↗
39. 10.1016/S1359-6462(01)01098-310.1016/S1359-6462(01)01098-3 ↗
40. 10.1016/j.actamat.2003.12.02510.1016/j.actamat.2003.12.025 ↗
41. 10.1179/174328409X41202310.1179/174328409X412023 ↗
42. von Eye A., and Mun E.Y. ‘Log-linear modeling: concepts, interpretation, and application’; 2013, New York, Wiley.10.1002/9781118391778 ↗