article·2014-01-01

Preparation procedure of high purity tungsten via electron beam side surface melting

MA Yunzh

Abstract

The tungsten rod with a purity of 99. 955% was purified by using a 250 kW electron beam melting furnace and the morphology,purity and micro-hardness of the raw tungsten rod and melted tungsten ingot were observed and measured by scanning electron microscopy( SEM),inductively coupled plasma atomic emission spectrometry( ICP- MS) and micron-indentation instrument,respectively. The results showed that,during the electron beam bombardment,the edge of raw tungsten end face was first melted. After electron beam melting for one time,the purity of the raw tungsten significantly was increased to 99. 975%,the removal ratios of interstitial impurities O and C elements were 55. 5% and 45. 8%,respectively. The vapor pressures of noninterstitial impurities were closely related to the removal rate,and the impurity elements with higher vapor pressures,such as As,Cd,K and Mg elements,were removed more completely,whose removal ratios were 90%,95%,75 % and 71. 4%,respectively. At the same time,As,Cd,K and Mg element contents were reduced to 1,1,5 and 10 μg / g in the tungsten ingot,respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fusion materials and technologies · Advanced Materials Characterization Techniques · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.