journal article·2002-05

Hot workability and processing maps of aluminium based discontinuously reinforced composites

M. Vedani, E. Gariboldi, F. D'Errico

Materials Science and Technology· Volume 18· Issue 5
Publisher page

Abstract

Hot deformation behaviour under tensile conditions of Al6061/20%Al 2 O 3 , Al2618/20%Al 2 O 3 , and Al2618/20%SiC particle reinforced composites and of an unreinforced 6061 aluminium alloy was investigated in the temperature range 350–500°C and in the strain rate range 10 –3 -10 –1 s –1 . Processing maps were generated from the obtained data and the domains of optimal hot workability were identified for the different materials. Microstructural analyses on deformed specimens allowed it to be stated that dynamic recovery was the main restoration mechanism for the composites investigated. The concurrent evaluation of ductility and flow stress data also suggested that differences in reinforcement properties can play a significant role on property definition.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. 10.1007/BF0322263410.1007/BF03222634 ↗
2. 10.1080/17432847.1995.1194555610.1080/17432847.1995.11945556 ↗
3. 10.1179/02670839579016465210.1179/026708395790164652 ↗
4. 10.1007/s11661-000-0006-510.1007/s11661-000-0006-5 ↗
5. 10.1179/mst.1995.11.8.73410.1179/mst.1995.11.8.734 ↗
6. 10.1179/02670839479016407710.1179/026708394790164077 ↗
7. 10.1179/mst.1994.10.6.47510.1179/mst.1994.10.6.475 ↗
8. 10.1007/BF0113914310.1007/BF01139143 ↗
9. xu H., and PALMIERE E. J.: Mater. Sci. Forum, 1996, 217-222, Vol. 2, 1091–1096.
10. VEDANI M. POZZI M. and TUISSI A.: Proc. I. Conf. Euromat 2001 Rimini Italy; 2001 Milan Associazione Italiana di Metallurgia Paper 411.
11. 10.1179/02670830010150826110.1179/026708300101508261 ↗
12. 10.1016/S0924-0136(99)00292-710.1016/S0924-0136(99)00292-7 ↗
13. VEDANI M. and GARIBOLDI E.: Proc. Int. Conf. Limat 2001 Centre for Advanced Aerospace Materials Pusan Korea May 2001 Pohang University of Science and Technology 375 — 380.
14. YEH M. S., , WENG W. P., , WANG S. C., , and CHUANG T. H.: Metall. Mater. Trans. A, 2000, 31A, 1310 — 1313.
15. 10.1007/BF0265439510.1007/BF02654395 ↗
16. 10.1179/02670830110151095110.1179/026708301101510951 ↗
17. ZHANG B. L., , MACLEAN M. S., , and BAKER T. N.: Mater. Sci. Technol., 2000, 16, 897 — 902.
18. 10.1007/BF0266852510.1007/BF02668525 ↗
19. 10.1179/mst.1994.10.5.40610.1179/mst.1994.10.5.406 ↗
20. PRASAD Y. V. R. K. and SASIDHARA S.: ‘Hot working guide — a compendium of processing maps’; 1997 Materials Park OH ASM International.
21. 10.1088/0022-3727/31/22/02010.1088/0022-3727/31/22/020 ↗
22. NARAYANA MURTY S. V. S., , NAGESWARA RAO B., , and KASHYAP B. P.: Adv. Composites Lett., 2000, 9, 147–151.
23. SPIGARELLI S., , CERRI E., , CAVALIERE P., , and EVANGELISTA E.: Mater. Sci. Eng. A, 2002, A327, 144— 154.
24. 10.1007/BF0266490210.1007/BF02664902 ↗
25. 10.1007/BF0264550610.1007/BF02645506 ↗
26. VEDANI M. and GARIBOLDI E.: Acta Mater. 1996 44 3077–3088.10.1016/1359-6454(95)00437-8 ↗
27. 10.1016/0956-7151(95)90256-210.1016/0956-7151(95)90256-2 ↗
28. KANETAKE N., , NOMURA M., , and CHOU T.: Mater. Sci. Technol., 1995, 11, 1246— 1252.
29. CORBIN S. F., and WILKINSON H. S.: Acta Metall. Mater., 1994, 42, 1329 — 1335.
30. SINGH P. M., and LEWANDOWSKI J. J.: Metall. Trans., 1993, 24A, 2531 —2543.10.1007/BF02646532 ↗
31. LLORCA J., and POZA P.: Mater. Sci. Eng. A, 1994, A185, 25 — 37.