Microstructural and mechanical characterisation of ODS ferritic alloys produced by mechanical alloying and spark plasma sintering
Source abstract
Abstract
Powders with nominal composition Fe–14Cr–2W–0·4Ti were mechanically alloyed (MA) with Y2O3 in a planetary ball mill at two different rotational speeds. Consolidation of the as milled powders was performed by spark plasma sintering (SPS). As milled powders showed a highly deformed microstructure with elongated nanometre grains and, depending upon the rotational speed, different stages of the nanocluster evolution were observed to be produced. In the case of consolidated materials, grain growth occurred during the SPS process and it was possible to observe the influence of the MA parameters, with larger and more homogeneously distributed grains at the higher rotational speed. Additionally, Ti was observed to be incorporated to the nanoclusters after SPS, indicating a further step in their evolution during consolidation. The mechanical behaviour of the SPS compacts was evaluated by tensile and small punch testing also showing the influence of the MA parameters in the material behaviour.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
CIEMAT, Madrid, Spain
Fraunhofer IFAM, Dresden, Germany
HZDR, Dresden, Germany
GPM, UMR 6634; Université et INSA de Rouen, Saint-Etienne du Rouvray Cedex, France
Fraunhofer CNT, Dresden, Germany
ILL, Grenoble, France
References (37)
Show source-provided references
1. 10.1016/j.jnucmat.2011.10.03710.1016/j.jnucmat.2011.10.037 ↗
2. 10.1016/S0022-3115(98)00241-410.1016/S0022-3115(98)00241-4 ↗
3. 10.1146/annurev.matsci.38.060407.13031510.1146/annurev.matsci.38.060407.130315 ↗
4. 10.1007/s11661-013-1719-610.1007/s11661-013-1719-6 ↗
5. 10.1016/j.scriptamat.2007.05.02210.1016/j.scriptamat.2007.05.022 ↗
6. 10.1016/j.intermet.2006.03.00610.1016/j.intermet.2006.03.006 ↗
7. Liu T, Shen H, Zhang T and Zhu M: ‘Fabrication, microstructure and nmechanical properties of ODS ferritic alloy by SPS and HIP’, http://www.paper.edu.cn
8. 10.1016/j.jnucmat.2013.01.33110.1016/j.jnucmat.2013.01.331 ↗
9. 10.1016/j.jnucmat.2010.11.10210.1016/j.jnucmat.2010.11.102 ↗
10. 10.1016/j.jnucmat.2011.08.05310.1016/j.jnucmat.2011.08.053 ↗
11. 10.3139/120.11011510.3139/120.110115 ↗
12. 10.1016/j.jnucmat.2013.07.01910.1016/j.jnucmat.2013.07.019 ↗
13. B. Srinivasarao, K. Oh-Ishi, T. Ohkubo, and K. Hono: ‘Bimodally grained high-strength Fe fabricated by mechanical alloying and spark plasma sintering’, Acta Mater., 2009, 57, 3277–3286.10.1016/j.actamat.2009.03.034 ↗
14. 10.1016/j.jnucmat.2011.12.01010.1016/j.jnucmat.2011.12.010 ↗
15. Zhong S.Y: ‘Étude des évolutions microstructurales à haute température en fonction des teneurs initiales en Y, Ti et O et, de leur incidence sur les hétérogénéités de déformation dans les aciers ODS Fe–14Cr1W’, Doctoral thesis, Université Paris-Sud, Paris, France, 2012.
16. 10.1063/1.300096510.1063/1.3000965 ↗
17. 10.1016/j.jnucmat.2004.04.08310.1016/j.jnucmat.2004.04.083 ↗
18. 10.1016/j.jnucmat.2004.04.08510.1016/j.jnucmat.2004.04.085 ↗
19. 10.1016/j.jnucmat.2004.04.04210.1016/j.jnucmat.2004.04.042 ↗
20. Schönitz I: ‘Pulvermetallurgische Herstellung und Charakterisierung oxiddispersionsverfestigter Fe–Cr-Legierungen für Anwendungen in der Energietechnik’, Diploma thesis, Technical University Dresden, Institute of Materials Science, Dresden, Germany, 2011.
21. 10.1016/j.fusengdes.2007.05.04810.1016/j.fusengdes.2007.05.048 ↗
22. 10.1088/0957-0233/19/3/03400710.1088/0957-0233/19/3/034007 ↗
23. Lindner P: ‘Scattering experiments: experimental aspects, initial data reduction and absolute calibration’, in ‘Neutron, X-ray and light scattering methods applied to soft condensed matter’, (ed. Lindner P and Zemb Th), North Holland Delta Series; 2002, Amsterdam, Elsevier.
24. 10.1007/BF0045542810.1007/BF00455428 ↗
25. 10.1016/j.jnucmat.2004.06.01010.1016/j.jnucmat.2004.06.010 ↗
26. 10.1016/j.jnucmat.2010.12.07110.1016/j.jnucmat.2010.12.071 ↗
27. 10.1016/j.powtec.2011.10.03910.1016/j.powtec.2011.10.039 ↗
28. 10.1016/j.jnucmat.2014.01.02610.1016/j.jnucmat.2014.01.026 ↗
29. 10.1016/j.jnucmat.2008.12.17110.1016/j.jnucmat.2008.12.171 ↗
30. 10.1103/PhysRevB.82.18410310.1103/PhysRevB.82.184103 ↗
31. 10.31399/asm.tb.emea.978162708251810.31399/asm.tb.emea.9781627082518 ↗
32. Eriksson M: ‘Spark plasma sintering enhancing grain sliding, deformation and grain size control studies of the systems Ti, Ti/TiB2, Na0·5 K0·5 NbO3, and hydroxyapatite’, Doctoral thesis, Department of Materials and Environmental Chemistry, Stockholm University, Stockholm, Sweden, 2010.
33. 10.1016/j.jnucmat.2011.10.04210.1016/j.jnucmat.2011.10.042 ↗
34. 10.1016/j.jnucmat.2010.12.05610.1016/j.jnucmat.2010.12.056 ↗
35. Park EK, Hong SM, Park JJ, Lee MK and Rhee CK: ‘An investigation on stability of Y2O3 and sintering of Fe-base ODS particles prepared by high energy ball milling’, Proc. 18th Int. Conf. on ‘Composite materials’, Jeju Island, Korea, August 2011, Korean Society of Composite Materials. Paper no. P3-40-IK0875.
36. 10.1016/j.jnucmat.2008.12.15610.1016/j.jnucmat.2008.12.156 ↗
37. 10.1016/j.jnucmat.2011.08.01610.1016/j.jnucmat.2011.08.016 ↗