journal article·2003-10

Superplastic behaviour of annealed AA 8090 Al-Li alloy

B. P. Kashyap, M. C. Chaturvedi

Materials Science and Technology· Volume 19· Issue 10
Publisher page

Abstract

High temperature flow behaviour and microstructural evolution were investigated in an annealed AA 8090 Al - Li alloy over the temperature range 623 - 803 K and strain rate range ~ 6 × 106 - 3 × 102 s-1. Stress - strain rate data, obtained using a differential strain rate test technique and plotted in log - log scale, exhibited three regions I, II, and III, with increasing strain rate. In these regions, the values of strain rate sensitivity index m and the activation energy for deformation were determined to be 0.17, 0.43, and 0.17; and 758.8, 93.3, and 184.3 kJ mol-1, respectively. The stress - strain curves obtained from constant strain rate tests exhibited flow hardening at lower strain rates and higher temperatures whereas flow softening occurred at higher strain rates and lower temperatures. The microstructural evolution revealed the dominance of grain growth under the former conditions and dynamic recrystallisation under the latter conditions. Ductility and m were found to increase with temperature, with the maximum values of 402% and 0.55, respectively, at a temperature 803 K and strain rate 2 × 10-4 s-1.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. GRIMES R. · Sheet Met. Ind · 1982 · 59 · 885
2. 10.1179/cmq.1986.25.3.25710.1179/cmq.1986.25.3.257 ↗
3. R. AMICHO and N. RIDLEY: in ‘Aluminum-Lithium V’, (ed. T. H. Sanders and E. A. Starke), 159–167; 1989, Birmingham, MCEP.
4. R. A. RICKS and N. C. PARSON: in ‘Aluminum-Lithium V’, (ed. T. H. Sanders and E. A. Starke), 169–178; 1989, Birmingham, MCEP.
5. H. YOSHIDA, H. TANAKA, S. TSUCHIDA, T. TSUZUKU and A. TAKAHASHI: in ‘Aluminum-Lithium V’, (ed. T. H. Sanders and E. A. Starke), 179–183; 1989, Birmingham, MCEP.
6. A. J. SHAKESHEFF, D. S. MCDARMAID and P. J. GREGSON: in ‘Aluminum-Lithium V’, (ed. T. H. Sanders and E. A. Starke), 201–209; 1989, Birmingham, MCEP.
7. 10.1179/mst.1990.6.11.105810.1179/mst.1990.6.11.1058 ↗
8. 10.1179/mst.1991.7.3.27610.1179/mst.1991.7.3.276 ↗
9. 10.1007/BF0264733010.1007/BF02647330 ↗
10. A. S. D'OLIVELRA, P. S. BATE and W. T. ROBERTS: in ‘The processing, properties and applications of metallic and ceramic materials’, IRC '92, (ed. M. H. Loretto and C. J. Beevers), 1001–1006; 1992, Birmingham, MCEP.
11. BLACKWELL P. L. · Metall. Trans. A · 1993 · 24 · 1085— 109310.1007/BF02657239 ↗
12. 10.1007/BF0267061210.1007/BF02670612 ↗
13. 10.1016/0956-716X(95)93206-J10.1016/0956-716X(95)93206-J ↗
14. 10.1007/BF0264880210.1007/BF02648802 ↗
15. GHOSH A. K. · Metall. Trans. A · 1979 · 10 · 24110.1007/BF02658391 ↗
16. 10.1007/BF0055302810.1007/BF00553028 ↗
17. SAKAI T. · Mater. ScL Technol · 1990 · 6 · 1251 — 1257
18. 10.1179/mst.1985.1.4.29110.1179/mst.1985.1.4.291 ↗
19. 10.1007/BF0266729410.1007/BF02667294 ↗
20. 10.1007/BF0264238310.1007/BF02642383 ↗
21. 10.1007/BF0264580910.1007/BF02645809 ↗
22. J. CADEK: ‘Creep in metallic materials’, 176–204; 1988, Amsterdam, Elsevier.
23. H. J. FROST and M. F. ASHBY: ‘Deformation mechanism maps’, 20–29; 1982, Oxford, Pergamon Press.
24. T. H. COURTNEY: ‘Mechanical behaviour of materials’, 263— 324; 1990, New York, McGraw-Hill.