Properties, processability and weldability of a novel affordable creep resistant nickel base superalloy
Source abstract
Abstract
A recently designed heat resistant alloy for operation ∼750°C in power plant, named FT750DC, of composition Ni–20Cr–5Fe–3·5W–2·3Al–2·1Ti–0·07C–0·4Si–0·005B (wt-%), is fully characterised. Creep rupture and damage is investigated, as well as Charpy impact toughness. The alloy processability is also assessed: castability (comparison between measured microsegregation and Scheil simulation), forgeability (hot tensile ductility, strain hardening and recrystallisation behaviour), γ′ aging heat treatment (gamma-prime precipitation kinetics) and weldability (GTAW/TIG). It is demonstrated that this material, made affordable by avoiding the use of expensive alloying elements, with a creep rupture life in excess of 100 000 h at 750°C under 100 MPa, is easily castable, forgeable and weldable. It can therefore be favourably compared to concurrent alloys for fossil fuel or nuclear power plant applications (like the coal fired ultra supercritical steam power plant, or the nuclear high temperature gas cooled reactor) currently under assessment, such as alloys 230, 617, 625, 740, HX, etc.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Blum R., and Vanstone R. W.: in ‘Parsons 2003 — engineering issues in turbine machinery, power plant and renewables’, (ed.Strang A. et al), 489-510; 2003, London, Maney Publishing.
2. Kim W. G., Yin S. N., Ryu W. S., and Jang J. H.: Proc. ASME Pressure Vessel & Piping Conf./CREEP8 Conf., Denver, CL, July 2007, ASME, Paper CREEP2007-26834.
3. Ren W., and Swimdeman R.: Proc. ASME Pressure Vessel & Piping Conference/CREEP8 Conf., Denver, CL, July 2007, ASME, Paper PVP2007-26091.
4. Katcher M., and Klarstrom W. L.: Proc. ASME Pressure Vessel & Piping Conf./CREEP8 Conf., Denver, CL, July 2007, ASME, Paper PVP2007-26656.
5. 10.1179/02670830322500978810.1179/026708303225009788 ↗
6. 10.1179/02670830322500979710.1179/026708303225009797 ↗
7. 10.1179/02670830322500980510.1179/026708303225009805 ↗
8. Ashby M. F. ‘Materials selection in mechanical design’; 2005, Amsterdam, Elsevier.
9. Alstom and Mistsui Babcock: Private communications, 1998–2000.
10. Scheil E. · Z. Metall · 1942 · 34 · 70
11. Rindler W., Kozeschnik E., and Buchmayr B.: Steel Res. 2000, 71, 460–465.10.1002/srin.200005715 ↗
12. Thermo-Calc is a product of Thermo-Calc Software: www.thermocalc.com/
13. Saindrenan G. · J. Phys. IV · 2005 · 123 · 111
14. Ludwik P. ‘Elemente der Technologischen Mechanik'; 1909, Berlin, Springer.10.1007/978-3-662-40293-1 ↗
15. Plati A. · 2003
16. Wang N., Mokadem S., Rappaz M., and Kurz W.: Acta Mater. 2004, 52, 3173–3182.10.1016/j.actamat.2004.03.047 ↗
17. Owczarski W. A., Duvall D. S., and Sullivan C. P.: Weld. 1, 1966, 45, 145s-155s.
18. 10.1179/13621710422501709910.1179/136217104225017099 ↗
19. Nakao Y., and Shinozaki K.: in ‘High temperature materials for power engineering’, (ed. Bachelet E. et al), 1461–1470; 1990, Dordrecht, Kluwer Academic Publishers.$9
20. TTNi 7 is a product of Thermotech Ltd: www.thermotech.co.uk/
21. Haynes International, datasheet for alloy 230: www.haynesintl.corn/
22. NiDI (Nickel Development Institute): High-temperature high-strength nickel base alloys, 1995, Supplement number 393.