journal article·2013-12

Correlation of microstructures and low temperature toughness in low carbon Mn–Mo–Nb pipeline steel

B X Wang, X H Liu, G D Wang

Materials Science and Technology· Volume 29· Issue 12
Publisher page

Abstract

By adjusting thermomechanical controlled processing parameters, different microstructures were obtained in a low carbon Mn–Mo–Nb pipeline steel. The microstructural characteristic and its effect on low temperature toughness were investigated. The results show that under higher reduction in austenite non-recrystallisation region and faster cooling rate during accelerated cooling, the microstructure is dominated by acicular ferrite (AF) accompanied by a small amount of fine martensite/austenite (M/A) islands. In contrast, lower reduction and slower cooling rate lead to a predominantly quasi-polygonal ferrite microstructure with coarse M/A islands. The fine effective grain size (EGS) and the high fraction of high angle grain boundaries (HAGBs) make the cleavage crack propagation direction deflect frequently. The coarse M/A islands can lead to cleavage microcracks at the M–A/ferrite matrix interfaces. Compared with the microstructure mainly consisting of quasi-polygonal ferrite, the microstructure dominated by AF exhibits excellent low temperature toughness because of fine EGS, high fraction of HAGBs and fine M/A islands.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Mechanical Engineering, Liaoning Shihua University, Fushun 113001, China

State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China

References (28)

Show source-provided references
1. 10.1016/j.msea.2007.06.00310.1016/j.msea.2007.06.003 ↗
2. 10.1007/s11661-005-0315-910.1007/s11661-005-0315-9 ↗
3. 10.1016/j.msea.2010.02.06710.1016/j.msea.2010.02.067 ↗
4. 10.1007/s11661-009-0135-410.1007/s11661-009-0135-4 ↗
5. 10.1016/j.matdes.2009.03.02610.1016/j.matdes.2009.03.026 ↗
6. 10.1016/j.msea.2006.12.09710.1016/j.msea.2006.12.097 ↗
7. ASTM: ‘Standard test methods for notched bar impact testing of metallic materials’, ASTM Standard E23-02a, American Society of Testing and Materials, West Conshohocken, PA, USA, 2002.
8. 10.1016/j.ijpvp.2012.02.00110.1016/j.ijpvp.2012.02.001 ↗
9. 10.1016/j.msea.2009.03.05210.1016/j.msea.2009.03.052 ↗
10. 10.1016/0026-0800(79)90041-710.1016/0026-0800(79)90041-7 ↗
11. 10.1007/s11661-003-0010-710.1007/s11661-003-0010-7 ↗
12. 10.1016/j.scriptamat.2007.10.05310.1016/j.scriptamat.2007.10.053 ↗
13. 10.1016/S1359-6462(00)00392-410.1016/S1359-6462(00)00392-4 ↗
14. 10.1007/s11661-004-1007-610.1007/s11661-004-1007-6 ↗
15. 10.1016/j.msea.2007.06.03510.1016/j.msea.2007.06.035 ↗
16. 10.1016/j.matchar.2007.06.00110.1016/j.matchar.2007.06.001 ↗
17. 10.1016/S0921-5093(03)00074-110.1016/S0921-5093(03)00074-1 ↗
18. 10.1007/BF0264496410.1007/BF02644964 ↗
19. 10.1016/0921-5093(92)90410-310.1016/0921-5093(92)90410-3 ↗
20. 10.2355/isijinternational.44.61010.2355/isijinternational.44.610 ↗
21. 10.1007/s11661-009-0093-x10.1007/s11661-009-0093-x ↗
22. 10.1016/j.actamat.2005.07.00910.1016/j.actamat.2005.07.009 ↗
23. 10.1016/j.msea.2008.10.04210.1016/j.msea.2008.10.042 ↗
24. 10.1016/0001-6160(84)90234-710.1016/0001-6160(84)90234-7 ↗
25. 10.1007/BF0265159810.1007/BF02651598 ↗
26. 10.1016/j.jmatprotec.2010.10.01110.1016/j.jmatprotec.2010.10.011 ↗
27. 10.1007/s10853-012-6346-x10.1007/s10853-012-6346-x ↗
28. 10.1007/s10853-011-5592-710.1007/s10853-011-5592-7 ↗