journal article·2008-04

Solute redistribution during transient liquid phase bonding of IN738LC with BNi-3 interlayer

M. Mosallaee, A. Ekrami, K. Ohsasa, K. Matsuura

Materials Science and Technology· Volume 24· Issue 4
Publisher page

Abstract

Redistribution of alloying elements in the transient liquid phase (TLP) bonding zone of IN738LC/BNi-3/IN738LC was studied to investigate microstructural evolution in this area. Wavelength dispersive spectrometry and electron probe microanalysis revealed that, during non-isothermal solidification in the TLP bonding zone, enrichment of residual liquid phase with the positive segregating elements caused formation of intermetallic in the bonding zone. Scanning electron microscopy observation indicated that the redistribution of alloying elements, between TLP bonding zone and base alloy, resulted in formation of a γ ′ boundary layer, containing high density of fine γ ′, around the bonding zone. Diffusion of γ ′ promoting elements, from the base alloy inward the TLP zone, controlled the growth of this layer. Unlike TLP bonding at 1100–1150°C, isothermal solidification kinetic was reduced notably during TLP bonding at 1200–1250°C. Investigations demonstrated that the low isothermal solidification kinetic was not only due to the enrichment of liquid phase with the base alloying elements such as Ti and Zr, which was reported in the previous papers, but also the reduction of solid solubility limit of B in the base alloy contributed to the reduction of isothermal solidification kinetic.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Electronic Packaging and Soldering Technologies · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. 10.1016/0956-7151(91)90237-U10.1016/0956-7151(91)90237-U ↗
2. 10.1007/BF0064778210.1007/BF00647782 ↗
3. 10.1007/s11661-005-0051-110.1007/s11661-005-0051-1 ↗
4. Moore T. J. and Holko K. H.: Weld. J 1970 49 (9) 395s-409s.
5. Mattheij J. H. G.: Mater. Sci Technol, 1985, 1, (8), 608–612.
6. MacDonald W. D. and Eagar T. W.: Proc. Conf. on ‘Metal science of joining’ 93-100; 1992 Warrendale PA TMS.
7. Nicholas M. G.: ‘Joining process introduction to brazing and diffusion bonding’ 3/ 14; 1998 London Kluwer Academic Publisher.
8. Duvall D. S., , Owcazarski W. A., and Paulonis D. F.: Weld. J, 1974, 53, (4), 203–214.
9. 10.1007/BF0264928210.1007/BF02649282 ↗
10. 10.1007/s11661-998-0183-110.1007/s11661-998-0183-1 ↗
11. 10.2320/matertrans.42.29210.2320/matertrans.42.292 ↗
12. 10.2355/isijinternational.43.197610.2355/isijinternational.43.1976 ↗
13. Idowu O. A. Richards N. L. and Chaturvedi M. V.: Mater. Sci Eng. A 2005 A397 (1-2) 98–112.10.1016/j.msea.2005.01.055 ↗
14. Wikstrom N. P. Ojo O. A. and Chaturvedi M. V.: Mater. Sci. Eng. A 2006 A417 (1-2) 299–306.10.1016/j.msea.2005.10.056 ↗
15. in ‘Metals handbook’ 9th edn Vol. 10 ‘Material characterization’ 460; 1986 Metals Park OH ASM publication.
16. Gale W. F. and Orel S. V.: Metall Mater. Trans. A 27A (7) 1996 1925–1931.10.1007/BF02651942 ↗
17. Taha M. A., and Kurz W.: Z. Metall, 1981, 72, (8), 546–549.
18. 10.1179/mst.1991.7.12.114310.1179/mst.1991.7.12.1143 ↗
19. Tung S. K., , Lim L. C., , Lai M. O., and Wu H.: Mater. Sci Technol, 1997, 13, (12), 1051–1056.
20. 10.1179/174329304X870210.1179/174329304X8702 ↗
21. Porter D. A. and Easterling K. E.: ‘Phase transformation in metals and alloys’ 2nd edn; 1992 London Chapman and Hall Publication.10.1007/978-1-4899-3051-4 ↗
22. Karunaratne M. S. A. Cox D. C. Carter P. and Reed R. C.: in ‘Superalloys’ (ed.Pollock T. M. et al) 263-272; 2000 Warrendale PA TMS Pub.10.7449/2000/Superalloys_2000_263_272 ↗
23. Brandes E. A. and Brook G. B. (eds.): ‘Smithells metals reference book’ 7th edn; 1992 Oxford Butterworth-Heinemann Publication.
24. Crank J.: ‘The mathematics of diffusion’ 2nd edn 37; 1975 Oxford Oxford University Press.
25. Portnoi K. I., , Romashov V. M., , Chubarov V. M., , Levinskaya M. K. H., and Saibekov S. E.: Poroshk. Metall, 1967,50, (2), 15–21.
26. Ramirez J. E. and Liu S.: Weld. J 1992 71 (10) 365s-375s.
27. Funamoto T., , Kato M., , Kajiwara R., , Yasuda K., , Shida T., and Matsuda F.: Trans. Jpn Weld. Soc., 1993, 24, (1), 30–38.
28. 10.1007/s11661-000-0114-210.1007/s11661-000-0114-2 ↗
29. 10.1361/10549719977034088810.1361/105497199770340888 ↗
30. Tokoro K. et al: Mater. Sei. Eng. A 2007. Author: Please provide the et al. authors’ names and update the information. P. Wahi: Acta Metall.