Mechanical characterisation and quality index of A356-type aluminium castings heat treated using fluidised bed quenching
Source abstract
Abstract
The current study aimed at investigating the effect of fluidised sand bed quenching on the mechanical performance and quality index of A356·2 aluminium cast alloys. Traditional water and conventional hot air quenching media were used to establish a relevant comparison with fluidised sand bed quenching. Quality charts were generated using two models of quality indices to support the selection of material conditions on the basis of the proposed quality indices. The use of a fluidised sand bed for the direct quenching aging treatment of A356·2 casting alloys yields greater UTS and YS values compared to conventional furnace quenched alloys. For the same aging conditions (170°C/4 h), the fluidised bed quenched aged 356 alloys show nearly the same or better strength values than those quenched in water and then aged in a CF or an FB. Based on the quality charts developed for alloys subjected to different quenching media, higher quality index values are obtained by water quenched T6-tempered A356 alloys. Using hot sand as a quenching medium at different temperatures, namely 170, 190 and 210°C, reduces both the strength and the quality with increase in quenching temperature for the alloys investigated. The regression models indicate that the eutectic silicon modification factor has the most significant effect on the quality results of the alloys investigated, for all heat treatment cycles, as compared to other metallurgical parameters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Université du Québec à Chicoutimi, Chicoutimi, PQ G7H 2B1, Canada
Faculty of Engineering, Department of Metallurgy, Cairo University, Giza, Egypt
Center of Excellence for Research in Engineering Materials, King Saud University, Saudi Arabia
GM Power-train Group, Metal Casting Technology, Milford, NH 03055, USA
References (48)
Show source-provided references
1. 10.1016/B978-075065692-4/50020-010.1016/B978-075065692-4/50020-0 ↗
2. 10.1023/A:102190171557810.1023/A:1021901715578 ↗
3. St John D, Caceres C, Zhang D, Edwards G, Taylor J, Schaffer G: ‘Aluminum alloys for cast automotive components’, 2nd Conference and Exhibition on Materials in the Automotive Industry, IMMA, Conference Proceedings, Melbourne, Victoria, Australia, April 1996, 140–143.
4. Spada AT · Eng. Cast. Solut. · 2002 · 4 · 28
5. Askeland R, Phule P: ‘The science and engineering of materials’, 4th edn, 366, 373, 374; 2003, USA, Bill Stenquist.
6. ‘Properties and selection: nonferrous alloys and special-purpose materials’, ASM Handbook, Vol. 2; 1990, Materials Park, OH, ASM International.
7. Hatch J E, ed (ed.): ‘Aluminum: properties and physical metallurgy’, 5, 153, 177, 348; 1984, Materials Park, OH, American Society for Metals .
8. Davis J E, ed (ed.): ‘Aluminum and aluminum alloys’, ASM Specialty Handbook; 1993, Materials Park, OH, ASM International.
9. 10.1007/s11661-001-0069-y10.1007/s11661-001-0069-y ↗
10. Abubakre OK · J. Min. Mater. Charact. Eng. · 2009 · 8 · 303
11. 10.4028/www.scientific.net/MSF.217-222.78310.4028/www.scientific.net/MSF.217-222.783 ↗
12. Keist J: ‘The development of a fluidized bed process for the heat treatment of aluminum alloys’, JOM, TMS, April 2005.10.1007/s11837-005-0079-0 ↗
13. Glasser M: ‘Heat treating aluminum with fluidized bed quenching’, JOM, Aluminum Innovations, Part III, TMS, May 1998.10.1007/s11837-998-0034-y ↗
14. Dymov GD · Metallov · 1976 · 10 · 24
15. Kurbatov VP · Metallov · 1970 · 2 · 66
16. 10.1016/j.matdes.2010.10.02310.1016/j.matdes.2010.10.023 ↗
17. Apelian D · J. Phys. IV · 2004 · 120 · 555
18. Van Wert J · AFS International Conference on Structural Aluminum Castings · 2003 · 2 · 383
19. Keist J, Dingmann D, Bergman C: ‘Fluidized bed quenching: reducing residual stresses and distortion’, Proc. 23th Heat Treating Society Conf., Pittsburgh, PA, USA, ASM, September 2005, 263–270.
20. Keist J, Bergman C: ‘Heat treating aluminum alloys utilizing fluidized bed quenching’, Proc. TMS Annual Meeting & Exhibition, Charlotte, NC, USA, March 2004, TMS,
21. 10.1179/136404606X15782710.1179/136404606X157827 ↗
22. Jacob S · AFS Trans. · 2000 · 108 · 811
23. 10.1016/j.matdes.2005.08.00610.1016/j.matdes.2005.08.006 ↗
24. 10.1007/s11661-004-0053-410.1007/s11661-004-0053-4 ↗
25. Keist J · 2007 · 225
26. Knobloch VR · Cast. Plant Technol. Int. · 2002 · 18 · 10
27. Shivkumar S · AFS Trans. · 1989 · 97 · 791
28. 10.1016/S1359-6454(99)00033-610.1016/S1359-6454(99)00033-6 ↗
29. 10.1016/S1359-6454(98)00059-710.1016/S1359-6454(98)00059-7 ↗
30. Polmear IJ · Mater. Forum · 2004 · 28 · 1
31. 10.2298/JMMB0202061M10.2298/JMMB0202061M ↗
32. 10.1007/s11661-006-0048-410.1007/s11661-006-0048-4 ↗
33. Drouzy M · AFS Int. Cast Met. J. · 1980 · 5 · 43
34. 10.1361/10599490077034617810.1361/105994900770346178 ↗
35. 10.1080/13640461.2000.1181937510.1080/13640461.2000.11819375 ↗
36. 10.1016/S0921-5093(99)00128-810.1016/S0921-5093(99)00128-8 ↗
37. Dieter GE: ‘Mechanical metallurgy’, 3rd edn; 1986, New York, McGraw-Hill.
38. Closset B · Metall. Trans. A · 1981 · 13 · 94510.1007/BF02643389 ↗
39. Smith RW: ‘Modification of aluminum silicon alloys’, Proc. Conf. on ‘Solidification of metals’, Brighton, London, UK, December 1967, Iron and Steel Institute, 224–236.
40. 10.1007/BF0264620410.1007/BF02646204 ↗
41. Lu S.-Z · Light Met. · 1995 · 989
42. Montgomery DC: ‘Design and analysis of experiments’; 1991, New York, John Wiley & Sons.
43. 10.1080/00401706.1984.1048792810.1080/00401706.1984.10487928 ↗
44. 10.1179/136404607X26822910.1179/136404607X268229 ↗
45. 10.1007/BF0266384210.1007/BF02663842 ↗
46. Mackenzie DS · Ind. Heat. · 2006 · 73 · 53
47. 10.1016/S0921-5093(01)01247-310.1016/S0921-5093(01)01247-3 ↗
48. Chaudhury SK · AFS Trans. · 2004 · 14 · 289