Study on static strain aging of 6082 aluminium alloy
Source abstract
Abstract
In this study both the quench aging and static strain aging kinetics of a 6082 Al alloy were investigated at a temperature range of 130–200°C using the Vickers hardness and tensile test. The activation energy and dislocation density were determined at different stages of the aging phenomenon. The former was used to analyse the kinetics of aging and the latter to interpret the competition of strengthening and recovery mechanisms during aging. It is shown that different activation energies are achieved depending on the aging time and temperature relating to formation of appropriate precipitates at different stages of aging. Moreover, it is revealed that prestrain reduces the activation energy. A linear equation is proposed between the dislocation density and the plastic strain after static strain aging. The competition of recovery with strengthening mechanisms during strain aging is discussed with regard to dislocation density after aging.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and EngineeringSharif University of Technology, Azadi Ave., Tehran, Iran
References (25)
Show source-provided references
1. 10.1016/j.ijplas.2004.11.00210.1016/j.ijplas.2004.11.002 ↗
2. Polmear I. J. ‘Light alloys: metallurgy of the light metals’, 2nd edn, 22-26 and 92; 1989, London, Arnold.
3. 10.1016/j.jmatprotec.2005.02.11510.1016/j.jmatprotec.2005.02.115 ↗
4. Edwards G. A., Stiller K., Dunlop G. L., and Couper M. J.: Acta Mater. 1998, 46, 3893–3904.10.1016/S1359-6454(98)00059-7 ↗
5. Marioara C. D., Andersen S. J., Jansen J., and Zandbergen H. W.: Acta Mater. 2001, 49, 321–328.10.1016/S1359-6454(00)00302-5 ↗
6. Marioara C. D., Andersen S. J., Jansen J., and Zandbergen H. W.: Acta Mater. 2003, 51, 789–796.10.1016/S1359-6454(02)00470-6 ↗
7. Murayama M., and Hono K.: Acta Mater. 1999, 47, 1537–1548.10.1016/S1359-6454(99)00033-6 ↗
8. Kubin L. P., Estrin Y., and Perrier C.: Acta Metall Mater. 1992, 40, 1037–1044.10.1016/0956-7151(92)90081-O ↗
9. 10.1007/978-1-4684-1860-610.1007/978-1-4684-1860-6 ↗
10. 10.1179/imr.1970.15.1.10110.1179/imr.1970.15.1.101 ↗
11. 10.1016/S0921-5093(01)01318-110.1016/S0921-5093(01)01318-1 ↗
12. 10.1016/j.cap.2005.07.03910.1016/j.cap.2005.07.039 ↗
13. 10.2320/matertrans.45.218210.2320/matertrans.45.2182 ↗
14. ASTM: ‘Annual book of ASTM standards: metals test methods and analytical procedures’, Vol. 03.01, 213; 1987, Philadelphia, American Society for Testing and Materials.
15. 10.1007/s11661-998-0242-710.1007/s11661-998-0242-7 ↗
16. 10.1007/s11661-005-0326-610.1007/s11661-005-0326-6 ↗
17. 10.1016/S0921-5093(02)00245-910.1016/S0921-5093(02)00245-9 ↗
18. Dieter G. E. ‘Mechanical metallurgy’, 3rd edn, 176, 212 and 262; 1986, New York, McGraw-Hill.
19. Graff S., Forest S., Strudel J.L., Prioul C., Pilvin P., and Béchade J.L.: Mater. Sci Eng. A, 2004, A387—A389,181–185.10.1016/j.msea.2004.02.083 ↗
20. 10.1007/BF0267061410.1007/BF02670614 ↗
21. Esmaeili S., Lloyd D. J., and Poole W. J.: Acta Mater. 2003, 51, 2243–2257.10.1016/S1359-6454(03)00028-4 ↗
22. Smallman R. E., and Bishop R. J. ‘Modern physical metallurgy and materials engineering’, 6th edn, 82 and 117-119; 1999, Oxford, Butterworth-Heinemann.
23. 10.1016/j.jallcom.2006.06.00410.1016/j.jallcom.2006.06.004 ↗
24. 10.1007/s10973-006-7837-210.1007/s10973-006-7837-2 ↗
25. 10.1016/j.compscitech.2006.10.00710.1016/j.compscitech.2006.10.007 ↗