journal article·2001-07

Influence of sulphur and vanadium additions on toughness of bainitic steels

N. Tsunekage, K. Kobayashi, H. Tsubakino

Materials Science and Technology· Volume 17· Issue 7
Publisher page

Abstract

The Charpy impact toughness of bainitic steels, in the longitudinal direction, was increased by appropriate additions of sulphur and vanadium. The Charpy impact value in the longitudinal direction was highest when the sulphur content was 0.1 wt-%. A suppression of austenite grain growth by manganese sulphides was recognised when the austenitising temperature was higher than 1373 K. Furthermore, it was found that bainite packets were refined by an increase in sulphur content, because manganese sulphides existing in the austenite grains promoted bainite transformation. The main effect of the vanadium addition was probably to enhance the above effect by precipitation of vanadium carbonitrides on the manganese sulphides. Accordingly, an increase in toughness with additions of sulphur and vanadium may be attributed to bainite packet refinement resulting from the suppression of austenite grain growth and the promotion of intragranular bainite transformation by manganese sulphides.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. MAEDA C. · J. Soc. Automot. Eng. Jpn · 1989 · 43 · 79
2. KOJIMA H. · Zairyo to Purosesu (Curr. Adv. Mater. Process · 1992 · 5 · 772
3. CHIBA T. · Sanyo Tech. Rep · 1994 · 1 · 24
4. KATSUMATA M. · Zairyo to Purosesu (Curr. Adv. Mater. Process · 1992 · 5 · 805
5. IWAMA N. · Zairyo to Purosesu (Curr. Adv. Mater. Process · 1992 · 5 · 801
6. WAKOH M. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1996 · 82 · 59310.2355/tetsutohagane1955.82.7_593 ↗
7. SAWAI T. · Zairyo to Purosesu (Curr. Adv. Mater. Process · 1988 · 1 · 1196
8. SAWAI T. · Zairyo to Purosesu (Curr. Adv. Mater. Process · 1989 · 2 · 239
9. KADOWAKI y. · J. Soc. Auto. Eng. Jpn · 1985 · 39 · 927
10. NOMURA I. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1996 · 82 · 941 — 946
11. YOKOMIZO Y. · J. Jpn Soc. Heat Treat · 1984 · 24 · 264
12. OCHI T. · ISS Mech. Work. Steel. Proces. Conf. Proc · 1988 · 25 · 65
13. YAMAGUCHI J. · Zairyo to Purosesu (Curr. Adv. Mater. Process · 1997 · 10 · 1312
14. 10.1007/BF0265226810.1007/BF02652268 ↗
15. SAKAGUCHI K. · Zairyo to Purosesu (Curr. Adv. Mater. Process · 1997 · 10 · 1310
16. 10.1016/0001-6160(86)90169-010.1016/0001-6160(86)90169-0 ↗
17. 10.1016/S1359-6454(96)00187-510.1016/S1359-6454(96)00187-5 ↗
18. 10.1007/BF0266852610.1007/BF02668526 ↗
19. 10.1016/0956-7151(94)90464-210.1016/0956-7151(94)90464-2 ↗
20. ISHIKAWA F. · Int · 1995 · 3
21. SANBONGI K. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1978 · 64 · 14510.2355/tetsutohagane1955.64.1_145 ↗
22. NAGATA S. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1960 · 46 · 41210.2355/tetsutohagane1955.46.3_412 ↗
23. SMITH C. S. · Trans. AIME · 1948 · 175 · 15
24. ASHBY M. F. · Trans. AIME · 1969 · 245 · 413
25. HELLMAN P. · Scand. J. Metall · 1975 · 4 · 211
26. 10.2320/matertrans1989.38.95010.2320/matertrans1989.38.950 ↗
27. PICKERING F. B. · Symp. ‘Transformation and hard-enability in steels’, Ann Arbor, MI, USA, 1967, Climax Molybdenum Corp · 109
28. 10.1007/BF0264243910.1007/BF02642439 ↗
29. 10.2320/materia1962.28.73210.2320/materia1962.28.732 ↗
30. 10.2320/materia1962.29.54210.2320/materia1962.29.542 ↗
31. ENOMOTO M. · Z. Metallkd · 1999 · 90 · 19
32. ZHANG S. · Int · 1996 · 9